Akai - AT-2200 & AM-2200 Stereo set - Multiple models

For sale: an Akai AT-2200 stereo tuner and AM-2200 integrated amplifier set, a matching vintage hi-fi combination with classic Akai styling.

The AT-2200 provides radio reception, while the AM-2200 serves as the main stereo amplifier for connecting compatible audio sources and passive speakers.

Both units have been serviced. The tuner received new lights and was cleaned, while the amplifier had its potentiometers cleaned and the on/off indicator repaired.

Cosmetic condition:


The set is in used vintage condition.

General signs of age and previous use may be present
Front panels and controls remain presentable
Please review the photos for the exact cosmetic condition


Both units fully working

Tuner cleaned
Amplifier potentiometers cleaned
On/off indicator repaired
Tuner lights replaced
Set tested and ready for use

Specs:

Akai - AT-2200:

Reception: VHF/MW
Frequencies:
VHF: 88-108 MHz
MW: 520-1605 kHz
Frequency response:
Input sensitivity:
FM: 1.2 μV
MW: 180 μV/7 μV (ext.)
Distortion factor:
Mono: 70 dB
MW: >45 dB
Channel separation: >40 dB at 1 kHz
selectivity:
Co-wave selection: 1.3 dB
Spurious selection: >85 dB at 98 MHz
Image frequency attenuation:
VHF: >55 dB at 98 MHz

MW: >55 dB at 1000 kHz IF attenuation:

VHF: >85 dB at 98 MHz
MW: > 45 dB
AM suppression: >50 dB
Output voltage:
VHF: 0-1000 mV
MW: 0-350 mV

Akai - AM-2200:

Power output: 20 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.5%
Damping factor: 60
Input sensitivity: 3mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 85dB (MM), 95dB (line)
Channel separation: 55dB (MM)
Output: 150mV (line), 150mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 18 x transistors, 5 x diodes, 1 x IC

Dimensions (LxWxH): 38x24x28cm
Weight: 12 Kg
Volts: 220v (If it’s 200V or higher, you’ll need an adapter in the USA)