ESU N, H0, 0 - 50094 - Digital control unit (1) - ECoSDetector Feedback Module





Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145662 reviews
Rated Excellent on Trustpilot.
The new ECoSDetector feedback module, catalogue number 50094, has 16 digital inputs, including four RailCom sections, and comes in its original packaging.
Description from the seller
ECoSDetector feedback module, 16 digital inputs, of which 4 RailCom.
Current sensor
The ECoSDetector can monitor 16 track sections. The inputs can be switched individually between a switching input (ground input) or a current sensor using a jumper. The ECoSDetector can therefore be used universally on all rail systems and is the first choice for all two-wire controllers. Since the inputs, in which a maximum of 3 A may flow at any time, can be supplied in two separate current groups, each ECoSDetector can drive up to two booster circuits. Optocouplers ensure reliable detection.
Train number detection
In addition to conventional track occupancy detectors, the ECoSDetector can also specially monitor four of the 16 track sections: Using RailCom technology ("local detector"), on these sections it is not only possible to check whether a train is running, but even which train it is exactly (train number detection). For this, of course, you need RailCom-compatible locomotive decoders.
Smart
Knowing exactly which train is on a section, in combination with the ECoS routing module, leads to new features: The level crossing barriers can, for example, automatically lower, or trains search for a free track in the yard. In doing so, the switching inputs or track occupancy detectors are electronically "disconnected" to ensure reliable feedback, even with unreliable contacts or heavily soiled rails.
ECoSlink connection
Each ECoSDetector is connected directly to the central unit via the ECoSlink bus. All ECoS command stations and all Central Station Reloaded with ESU Update are suitable. The galvanic isolation of the bus system and the command station guarantees the highest operational safety and safe transfer to the command station. All ECoS detectors are automatically recognized by the central unit and integrated into the operation sequence. The configuration of the devices is done conveniently and easily directly at the command station and can also be performed after installation.
Future built in
The control software of each ECoSDetector can be updated and extended with additional features if necessary: the required "update" is performed fully automatically when needed by the control panel. Thus your ECoSDetector is always up-to-date with the latest technology.
Photos are part of the description
If defective within 1 month from the Netherlands, returnable free of charge. All packages are sent by registered and insured mail.
Seller's Story
ECoSDetector feedback module, 16 digital inputs, of which 4 RailCom.
Current sensor
The ECoSDetector can monitor 16 track sections. The inputs can be switched individually between a switching input (ground input) or a current sensor using a jumper. The ECoSDetector can therefore be used universally on all rail systems and is the first choice for all two-wire controllers. Since the inputs, in which a maximum of 3 A may flow at any time, can be supplied in two separate current groups, each ECoSDetector can drive up to two booster circuits. Optocouplers ensure reliable detection.
Train number detection
In addition to conventional track occupancy detectors, the ECoSDetector can also specially monitor four of the 16 track sections: Using RailCom technology ("local detector"), on these sections it is not only possible to check whether a train is running, but even which train it is exactly (train number detection). For this, of course, you need RailCom-compatible locomotive decoders.
Smart
Knowing exactly which train is on a section, in combination with the ECoS routing module, leads to new features: The level crossing barriers can, for example, automatically lower, or trains search for a free track in the yard. In doing so, the switching inputs or track occupancy detectors are electronically "disconnected" to ensure reliable feedback, even with unreliable contacts or heavily soiled rails.
ECoSlink connection
Each ECoSDetector is connected directly to the central unit via the ECoSlink bus. All ECoS command stations and all Central Station Reloaded with ESU Update are suitable. The galvanic isolation of the bus system and the command station guarantees the highest operational safety and safe transfer to the command station. All ECoS detectors are automatically recognized by the central unit and integrated into the operation sequence. The configuration of the devices is done conveniently and easily directly at the command station and can also be performed after installation.
Future built in
The control software of each ECoSDetector can be updated and extended with additional features if necessary: the required "update" is performed fully automatically when needed by the control panel. Thus your ECoSDetector is always up-to-date with the latest technology.
Photos are part of the description
If defective within 1 month from the Netherlands, returnable free of charge. All packages are sent by registered and insured mail.

