Denon - DCD-S10 CD player

DENON DCD-S10 CD player in excellent condition with original remote control and original multilingual instruction manual

CD player with ALPHA processor. The ALPHA processor can play 16-bit data with a 20-bit quality, using digital data stored on a CD or other media and interpolating the digital data where the sound occurred in nature. Moreover, when used with a CD having a different recording method, such as CD impulse data, the input signal is analyzed and the corresponding band is automatically adjusted. The D/A conversion section is equipped with the Λ SLC processor, a DENON exclusive, integrated in the D/A converter chip to improve accuracy. For the power supply section, a digital/analog separation structure was adopted to separate digital and analog circuits in the power system, which includes a power transformer, rectifier and leveling circuit. In addition, the audio circuit and the servo/digital circuit are arranged in separate units to clean the signal path and prevent interference. For the loader and the base frame of the tonearm drive mechanism, newly designed components were used. Finally, rigidity is increased thanks to the adoption of a lamina-steel shielding cover. The disk tray is coated with a special collagen-containing coating material to prevent vibration transmission, thus reducing vibrations to the disc.

By adopting a heavy chassis and lowering its center of gravity, the effect of vibrations is reduced. Furthermore, by using a composite material of different metals, such as sintered alloy and aluminum, for the floor-contact insulation part, vibrations are converted into heat, reducing the impact on sound quality.

The reading mechanism is positioned at the center of the chassis to optimize weight balance and minimize vibrations and resonances when the chassis is driven by a motor.

The servo circuit is equipped with a digital servo. In this circuit, the optimal amount of servo can be adjusted according to the conditions of each disc, detecting its state.

The DCD-S10 can be used as a DAC by mounting two digital coaxial input terminals with the optical system.

It features functions such as direct select, program select, repeat, manual search, automatic search, index search, fader, peak search and random playback.

It features an automatic editing function that allows you to specify the length of the tape.

It features an automatic spacing function that inserts about 4 seconds of silence between tracks.

Equipped with a 4-level brightness adjustment function, it allows you to modulate the display brightness.

General features:
Type: CD player
D/A conversion system: Lambda Super Linear Real 20-Bit 4-bit DAC
20-bit digital filter with 8x oversampling + third-order GIC analog filter
Frequency response: 2 Hz to 20 kHz
Signal-to-noise ratio: 118 dB
Dynamic range: 100 dB
Total harmonic distortion: 0.0018% (1 kHz)
Channel separation: 110 dB (1 kHz)
Analog output voltage: Fixed: 2.0 +/- 0.3 V/10 kΩ; Variable: 0 ~ 2.0 V/10 kΩ
Power: 100 VAC, 50/60 Hz
Power consumption: 20 W
External dimensions:
Width 434 x Height 135 x Depth 342 mm
Weight: 14 kg
Remote control
Original multilingual instruction manual