Bowers & Wilkins - 706 S2 Rosewood / 2-Way Standmount/Bookshelf Speaker set





€490 | ||
|---|---|---|
€450 | ||
€160 | ||
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145553 reviews
Rated Excellent on Trustpilot.
Description from the seller
Bowers & Wilkins 706 S2 is the larger monitor model in the 700 S2 series, finished in the attractive Rosewood (rosewood veneer). Within this line the loudspeakers are best known for using technologies from the more expensive 800 series, notably the woven silver-colored Continuum cone and the Carbon Dome tweeter. This combination creates a very open and direct midrange where voices and acoustic instruments come through clearly, without the treble sounding sharp or intrusive. Thanks to the 6.5-inch woofer and the slightly larger enclosure, they also deliver a fuller and deeper low end than the more compact 707 S2.
The set is complete with the original factory boxes, the magnetic grilles, and the two-piece foam plugs to dampen the bass ports a bit if placed close to a wall.
Condition: The pair is in very neat, undamaged condition. Both the cabinets and the wood veneer as well as the units themselves have no dents, scratches or other visible damage.
Specifications
Type: 2-way bass-reflex monitor / standmount speaker
Model: Bowers & Wilkins 706 S2
Finish: Rosewood veneer
Recommended amplifier power: 30 – 120 Watts at 8 Ohm
Frequency range: 45 Hz – 33,000 Hz (-6 dB)
Frequency response: 52 Hz – 28,000 Hz (±3 dB)
Sensitivity: 88 dB (2.83 V / 1 m)
Nominal impedance: 8 Ohm (minimum 3.7 Ohm)
Tweeter: 1 x 25 mm decoupled Carbon Dome tweeter
Low/mid: 1 x 165 mm Continuum cone bass/midrange
Bass port: Flowport at the rear
Connections: bi-wiring / bi-amping gold-plated binding posts
Included: original boxes, magnetic grilles and foam plugs
Dimensions (H x W x D): 35.9 x 20.0 x 28.5 cm (30.1 cm deep including grille and clamps)
Weight: approximately 8.0 kg each
Manufacturer: Bowers & Wilkins (United Kingdom)
Bowers & Wilkins 706 S2 is the larger monitor model in the 700 S2 series, finished in the attractive Rosewood (rosewood veneer). Within this line the loudspeakers are best known for using technologies from the more expensive 800 series, notably the woven silver-colored Continuum cone and the Carbon Dome tweeter. This combination creates a very open and direct midrange where voices and acoustic instruments come through clearly, without the treble sounding sharp or intrusive. Thanks to the 6.5-inch woofer and the slightly larger enclosure, they also deliver a fuller and deeper low end than the more compact 707 S2.
The set is complete with the original factory boxes, the magnetic grilles, and the two-piece foam plugs to dampen the bass ports a bit if placed close to a wall.
Condition: The pair is in very neat, undamaged condition. Both the cabinets and the wood veneer as well as the units themselves have no dents, scratches or other visible damage.
Specifications
Type: 2-way bass-reflex monitor / standmount speaker
Model: Bowers & Wilkins 706 S2
Finish: Rosewood veneer
Recommended amplifier power: 30 – 120 Watts at 8 Ohm
Frequency range: 45 Hz – 33,000 Hz (-6 dB)
Frequency response: 52 Hz – 28,000 Hz (±3 dB)
Sensitivity: 88 dB (2.83 V / 1 m)
Nominal impedance: 8 Ohm (minimum 3.7 Ohm)
Tweeter: 1 x 25 mm decoupled Carbon Dome tweeter
Low/mid: 1 x 165 mm Continuum cone bass/midrange
Bass port: Flowport at the rear
Connections: bi-wiring / bi-amping gold-plated binding posts
Included: original boxes, magnetic grilles and foam plugs
Dimensions (H x W x D): 35.9 x 20.0 x 28.5 cm (30.1 cm deep including grille and clamps)
Weight: approximately 8.0 kg each
Manufacturer: Bowers & Wilkins (United Kingdom)

