Roco H0 - 42615 - Model train tracks (1) - Electric rotary table with 15 inputs and outputs, direct current.





€101 | ||
|---|---|---|
€100 | ||
€81 | ||
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145662 reviews
Rated Excellent on Trustpilot.
The Roco 42615 is an H0-gauge electric turntable for DC model railways.
Description from the seller
Roco 42615 - Electric turntable for direct current.
Turntable with electric drive mechanism under the layout and control unit.
Suitable for all NEM (European model railway standard) compatible two-rail DC and three-rail AC model railways. Bridge length: 253 mm; this corresponds to 22 m on an original railway.
The minimum angle between two rail connections is 9 degrees. On the turntable, spacers are supplied for 1°, 3°, 6° and 9° divisions. This means that every division from 9° in steps of 1° between the track connections is possible.
The maximum number of track connections that can be made is 40. The turntable provides four track connections for two-rail DC.
Further track connections are available as accessories (42616).
If the turntable is used with a 3-rail AC model railway, your hobby retailer will swap the included original DC package for a package with 3-rail AC track connections (42617).
The turntable bridge drive is powered by 14 V AC. Depending on the system used, the traction supply will be DC or AC. The turntable is equipped with a control unit for pre-selecting the direction of rotation and starting the rotation of the turntable. If you release the turn switch, the turntable stops exactly at the next track connection.
Just like a real turntable, it is also possible to choose between two rotation speeds. The track voltage is supplied through the turntable. The track voltage of the track connections can be assigned via the control unit. This prevents a currently parked locomotive from accidentally moving away when two track connections face each other directly. *
A 1 meter 5-pin cable (connection between transformer and control unit) and a 2 meter long 8-pin cable (connection between control unit and turntable) are included.
Dimensions:
Required mounting opening: 280 mm.
Mounting depth measured from the table edge: 50 mm.
Outer diameter of the turntable without rail connections: 307 mm.
Turntable bridge length: 253 mm.
Suitable for all locomotives up to a total wheelbase of 250 mm.
* A loop module is required when using the turntable in DCC mode (digital).
Photos are part of the description
All packages are sent by registered mail and insured
Seller's Story
Roco 42615 - Electric turntable for direct current.
Turntable with electric drive mechanism under the layout and control unit.
Suitable for all NEM (European model railway standard) compatible two-rail DC and three-rail AC model railways. Bridge length: 253 mm; this corresponds to 22 m on an original railway.
The minimum angle between two rail connections is 9 degrees. On the turntable, spacers are supplied for 1°, 3°, 6° and 9° divisions. This means that every division from 9° in steps of 1° between the track connections is possible.
The maximum number of track connections that can be made is 40. The turntable provides four track connections for two-rail DC.
Further track connections are available as accessories (42616).
If the turntable is used with a 3-rail AC model railway, your hobby retailer will swap the included original DC package for a package with 3-rail AC track connections (42617).
The turntable bridge drive is powered by 14 V AC. Depending on the system used, the traction supply will be DC or AC. The turntable is equipped with a control unit for pre-selecting the direction of rotation and starting the rotation of the turntable. If you release the turn switch, the turntable stops exactly at the next track connection.
Just like a real turntable, it is also possible to choose between two rotation speeds. The track voltage is supplied through the turntable. The track voltage of the track connections can be assigned via the control unit. This prevents a currently parked locomotive from accidentally moving away when two track connections face each other directly. *
A 1 meter 5-pin cable (connection between transformer and control unit) and a 2 meter long 8-pin cable (connection between control unit and turntable) are included.
Dimensions:
Required mounting opening: 280 mm.
Mounting depth measured from the table edge: 50 mm.
Outer diameter of the turntable without rail connections: 307 mm.
Turntable bridge length: 253 mm.
Suitable for all locomotives up to a total wheelbase of 250 mm.
* A loop module is required when using the turntable in DCC mode (digital).
Photos are part of the description
All packages are sent by registered mail and insured

