Tannoy - Mercury V1 Custom Heavily Modified Variant Speaker set





Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145662 reviews
Rated Excellent on Trustpilot.
Description from the seller
Tannoy MERCURY V1 from 2013 handcrafted-modified to improve harmonic content and sensitivity with horns made from multilayer birch veneer and the bass cabinet rebuilt internally to increase low-frequency response.
All components are original Tannoy Mercury V1 except the RCA pins, replaced with a higher-grade model (gold version) and the feet not present in the original version.
The horns have an outer diameter of 14 cm and a depth of 17 cm, machined on a lathe
The total height of the cabinets with the feet is 63 cm
The original specifications before modification were as follows:
Amplifier power recommended from 10 to 70 W RMS
Peak 100 W and 50 W continuous RMS
Sensitivity 2.83 V at 1 m, 86 dB
Impedance 8 ohms
Frequency response (-6 dB) 45 Hz - 25 kHz
Tweeter 25 mm polyester dome with neodymium magnet
Woofer 130 mm cone coated with shielded multifiber
Crossover Linkwitz–Riley 4th order
The cabinets were clad after the modifications with matte red adhesive film and the front panel in suede leather in Sonos Faber style
The front panel, like the rest of the cabinet exterior panels, is MDF.
The sound is decidedly better than the original specifications
Tannoy MERCURY V1 from 2013 handcrafted-modified to improve harmonic content and sensitivity with horns made from multilayer birch veneer and the bass cabinet rebuilt internally to increase low-frequency response.
All components are original Tannoy Mercury V1 except the RCA pins, replaced with a higher-grade model (gold version) and the feet not present in the original version.
The horns have an outer diameter of 14 cm and a depth of 17 cm, machined on a lathe
The total height of the cabinets with the feet is 63 cm
The original specifications before modification were as follows:
Amplifier power recommended from 10 to 70 W RMS
Peak 100 W and 50 W continuous RMS
Sensitivity 2.83 V at 1 m, 86 dB
Impedance 8 ohms
Frequency response (-6 dB) 45 Hz - 25 kHz
Tweeter 25 mm polyester dome with neodymium magnet
Woofer 130 mm cone coated with shielded multifiber
Crossover Linkwitz–Riley 4th order
The cabinets were clad after the modifications with matte red adhesive film and the front panel in suede leather in Sonos Faber style
The front panel, like the rest of the cabinet exterior panels, is MDF.
The sound is decidedly better than the original specifications

