Sony - PS-LX510 Fully Automatic Linear-Tracking (Tangential) Belt-Drive Turntable





€50 | ||
|---|---|---|
€45 | ||
€40 | ||
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145879 reviews
Rated Excellent on Trustpilot.
The Sony PS-LX510 fully automatic linear-tracking turntable, made in 1984, is tested and working, in very good condition, and comes with a PS-LX500 manual.
Description from the seller
The Sony PS-LX510 is a direct-drive turntable with a distinctive technical construction and very good specifications.
The color of the turntable is silver.
Below are some particulars.
Quartz-controlled servo system with linear torque direct-drive BSL motor for very low wow and flutter and rumble values.
Because the record is scanned by a separate servo-motor-driven tangential tonearm, it is scanned without dead spots.
The arm is equipped with a high-quality plug-in cartridge type T4P/P-Mount.
The needle has been inspected under a microscope and is in good condition.
Microprocessor-controlled Soft Touch operation on the front panel for arm transport (2 speeds), speed selection, arm lift and repeat playback.
Fully automatic record-diameter detection.
Casing of acoustically inert SMBC.
The turntable is in exceptionally good condition and its operation is excellent.
Obviously there are some signs of use here and there.
Because a manual for this PS-LX510 type could not be found on the Internet, one from the PS-LX500 type is supplied with it. In it, virtually all instructions for the PS-LX510 can be found.
Technical data:
Turntable.
Platter: 30 cm (12 in), aluminium-alloy die-cast.
Motor: Linear Torque BSL (brushless and slotless) motor.
Drive system: Direct Drive.
Control system: Quartz lock servo control system.
Speed: 33⅓ and 45 rpm.
Wow and flutter: 0.03% (WRMS), 0.035% (WRMS). ±0.045% (DIN).
Signal to noise ratio: 75dB (DIN).
Automatic system: Lead-in, return, repeat, reject, up/down, record size selection.
Load characteristics: 0% up to 1.5 g tracking force (at lead-in groove of a record).
Speed deviations: Within ±0.0003%.
Tonearm
Type: Linear tracking tonearm.
Pivot-to-stylus length: 75 mm (3 inches).
Tracking error: ±0.1°.
Tracking force adjustment range: ±0.25 g.
Usable cartridge: plug-in type.
General
Power requirements: 110-220V, 120-240V ac. 50/60Hz.
Power consumption: 10W.
Dimensions: Approx. 430 x 90 x 356 mm (w/h/d)
Weight: 5.6 kg.
Year: 1984.
Serial number: 502297
The Sony PS-LX510 is a direct-drive turntable with a distinctive technical construction and very good specifications.
The color of the turntable is silver.
Below are some particulars.
Quartz-controlled servo system with linear torque direct-drive BSL motor for very low wow and flutter and rumble values.
Because the record is scanned by a separate servo-motor-driven tangential tonearm, it is scanned without dead spots.
The arm is equipped with a high-quality plug-in cartridge type T4P/P-Mount.
The needle has been inspected under a microscope and is in good condition.
Microprocessor-controlled Soft Touch operation on the front panel for arm transport (2 speeds), speed selection, arm lift and repeat playback.
Fully automatic record-diameter detection.
Casing of acoustically inert SMBC.
The turntable is in exceptionally good condition and its operation is excellent.
Obviously there are some signs of use here and there.
Because a manual for this PS-LX510 type could not be found on the Internet, one from the PS-LX500 type is supplied with it. In it, virtually all instructions for the PS-LX510 can be found.
Technical data:
Turntable.
Platter: 30 cm (12 in), aluminium-alloy die-cast.
Motor: Linear Torque BSL (brushless and slotless) motor.
Drive system: Direct Drive.
Control system: Quartz lock servo control system.
Speed: 33⅓ and 45 rpm.
Wow and flutter: 0.03% (WRMS), 0.035% (WRMS). ±0.045% (DIN).
Signal to noise ratio: 75dB (DIN).
Automatic system: Lead-in, return, repeat, reject, up/down, record size selection.
Load characteristics: 0% up to 1.5 g tracking force (at lead-in groove of a record).
Speed deviations: Within ±0.0003%.
Tonearm
Type: Linear tracking tonearm.
Pivot-to-stylus length: 75 mm (3 inches).
Tracking error: ±0.1°.
Tracking force adjustment range: ±0.25 g.
Usable cartridge: plug-in type.
General
Power requirements: 110-220V, 120-240V ac. 50/60Hz.
Power consumption: 10W.
Dimensions: Approx. 430 x 90 x 356 mm (w/h/d)
Weight: 5.6 kg.
Year: 1984.
Serial number: 502297

