Rotel - RA-612 Solid state integrated amplifier

​
Starting bid
€ 1

Add to your favourites to get an alert when the auction starts.

Matthew McIvor
Expert
Estimate  € 230 - € 280
Catawiki Buyer Protection

Your payment’s safe with us until you receive your object.View details

Trustpilot 4.4 | 145879 reviews

Rated Excellent on Trustpilot.

Description from the seller

The Rotel RA-612 is an integrated stereo hi-fi amplifier from the golden age of hi-fi, with an output power of 2 x 35 W RMS at 8 ohms. The preamplifier and power amplifier sections can be separated by removing two connecting pins (jumpers) on the rear panel. The unit features rotary knobs for bass and treble control (for both the left and right channels), rotary switches for speaker selection, tape monitor and input selection, as well as switches for tone defeat (bypassing the tone controls), low- and high-pass filters, loudness and muting.

It also has RCA and DIN connections for phono 1 and tape monitor 1, RCA connections for phono 2, tuner, two aux inputs and tape monitor 2, terminals for two pairs of speakers, a headphone jack and three power outlets for other equipment.

I’ve used this Rotel for the past six years without a single problem. The amplifier sounds excellent, but has a few blemishes on the case (see the last two photos) and could perhaps do with a clean.

Specifications
- Output power: 35 watts per channel at 8Ω (stereo)
- Frequency response: 10Hz to 50kHz
- Total harmonic distortion: 0.08%
- Damping factor: 50
- Input sensitivity: 2mV (MM), 150mV (line)
- Signal-to-noise ratio: 75dB (MM), 94dB (line)
- Output: 350mV (line), 60mV (DIN), 0.9V (pre-out)
- Dimensions: 430 x 140 x 330 mm
- Weight: 10.5 kg

The Rotel RA-612 is an integrated stereo hi-fi amplifier from the golden age of hi-fi, with an output power of 2 x 35 W RMS at 8 ohms. The preamplifier and power amplifier sections can be separated by removing two connecting pins (jumpers) on the rear panel. The unit features rotary knobs for bass and treble control (for both the left and right channels), rotary switches for speaker selection, tape monitor and input selection, as well as switches for tone defeat (bypassing the tone controls), low- and high-pass filters, loudness and muting.

It also has RCA and DIN connections for phono 1 and tape monitor 1, RCA connections for phono 2, tuner, two aux inputs and tape monitor 2, terminals for two pairs of speakers, a headphone jack and three power outlets for other equipment.

I’ve used this Rotel for the past six years without a single problem. The amplifier sounds excellent, but has a few blemishes on the case (see the last two photos) and could perhaps do with a clean.

Specifications
- Output power: 35 watts per channel at 8Ω (stereo)
- Frequency response: 10Hz to 50kHz
- Total harmonic distortion: 0.08%
- Damping factor: 50
- Input sensitivity: 2mV (MM), 150mV (line)
- Signal-to-noise ratio: 75dB (MM), 94dB (line)
- Output: 350mV (line), 60mV (DIN), 0.9V (pre-out)
- Dimensions: 430 x 140 x 330 mm
- Weight: 10.5 kg

Details

Era
1900-2000
Brand
Rotel
Model
RA-612
Multiple models
No
Physical condition
Good
Number of objects
1
Includes
No extra's
Serial number
60920700
Weight
10.5 kg
Functional condition
Tested and working/playable
Height
14 cm
Width
43 cm
Depth
33 cm
Sold by
The NetherlandsVerified
Private

Similar objects

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

For you in

Audio Equipment

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​