Harman Kardon - AVR 445 Solid state multi-channel receiver

06
days
18
hours
39
minutes
05
seconds
Starting bid
€ 1
Reserve price not met
Matthew McIvor
Expert
Estimate  € 210 - € 240
No bids placed

Catawiki Buyer Protection

Your payment’s safe with us until you receive your object.View details

Trustpilot 4.4 | 145967 reviews

Rated Excellent on Trustpilot.

Description from the seller

A beautiful piece of equipment for audiophiles. It dates from 2007 and works perfectly. It delivers exceptional sound for a great home cinema or music experience. It is a “high-current” amplifier, meaning it can drive demanding speakers and deliver a powerful sound presence at any volume. Both remote controls and the manual are included with the amplifier. There are several ways to enjoy surround sound: route the audio through an optical connection, enable LOGIC 7 (an improved equivalent of Pro Logic IIx), or use the analog RCA inputs. The HDMI inputs do not support compressed surround formats (Dolby Digital, DTS), only 2.0 PCM.

LOGIC 7
An active matrix decoding system developed by Lexicon and used in many Harman products. It can convert two-channel signals into five- or seven-channel signals. The system offers modes optimized for video and music soundtracks, as well as a conventional stereo music recording function. It was specially designed for recording studios characterized by a powerful front soundstage, while also reproducing sounds perceived beyond the room’s walls. A car version of this system accommodates the unique listening conditions inside vehicles. See Encoder/Decoder Matrix

High Current Capacity (HCC)
The number of watts per channel is an incomplete measure of an amplifier’s power. In terms of dynamics and impact, current is what matters. HCC is a general design approach that encompasses everything from transformer design and capacitor size to discrete output circuits and minimal use of negative feedback. This electronic system, comparable to a large-displacement, high-torque racing engine, produces audible results. You get superb transient response, tighter bass, and a stronger presence at any volume.

AUDIO
Continuous average power in stereo mode (FTC) per channel:
80 W (20 Hz–20 kHz, at < 0.07% THD, with 2 channels driven into 8 ohms)
6-channel surround modes, power per channel:
Front left and right channels: 65 W (< 0.07% THD, 20 Hz–20 kHz into 8 ohms)
Center channel: 65 W (< 0.07% THD, 20 Hz–20 kHz into 8 ohms)
Surround channels (side L & R, rear): 65 W (< 0.07% THD, 20 Hz–20 kHz into 8 ohms)
Linear input sensitivity/impedance (high level): 200 mV / 47 kohms
Signal-to-noise ratio (IHF-A): 100 dB
Adjacent-channel separation in surround system:
Dolby Pro Logic I and II: 40 dB
Dolby Digital: 55 dB
DTS (Digital Theater System): 55 dB
Frequency response at 1 W (0 dB, -3 dB): 10 Hz–130 kHz
High-frequency instantaneous current capability: ± 40 A
Slew rate: 40 V/µsec

Connections
8 digital audio inputs, 2 outputs
[6 rear-panel inputs (3 optical, 3 coaxial), 2 front-panel inputs (optical, coaxial switchable to output), 2 rear-panel outputs (optical, coaxial)]
5 Composite/S-Video audio/video inputs (V1, V2, V3, V4, DVD), 2 analog audio inputs (CD, TAPE)
Independent 7.1-channel audio inputs (8 Channel Direct Inputs)
7.1-channel pre-out audio outputs
Front-panel audio/video inputs, duplicate Composite/S-Video and switchable to output (V4)
RS232 port
1 connector for “The Bridge” iPod docking station

Settings
- EzSet EQ II parametric equalization: EzSet EQ II takes room volume and design into account to automatically adjust speaker levels, delays, sizes, and crossover frequencies, as well as those of two subwoofers.
- Quadruple Crossover Bass Manager
Allows different bass crossover frequencies to be configured according to the speakers in use: Group 1: Front left and right speakers; Group 2: Center speaker; Group 3: Surround speakers (SR, SL); Group 4: Surround back (SBR, SBL).
- Digital Bass Management
Converts analog signals received through the “8CH direct input” jacks to digital, and allows the AVR settings to be precisely adjusted for the type of speakers in use (Small / Large).
- Subwoofer crossover frequency: 40, 60, 80, 100, 120, and 200 Hz.
- Multi-room audio and integrated multi-zone amplification: allows an additional amplifier to be connected to provide audio in another room. In 5.1 use, the 2 surround back channels (SBR and SBL) can be assigned to the multi-room zone and amplified directly by the AVR.
- A-Bus Ready / RS232: A-Bus allows the amplifier to be controlled remotely using an A-Bus patented, directly amplified keypad. The RS232 port allows control of the amplifier through high-end home automation systems and also enables software updates.

Power supply: AC 220–240 V / 50 Hz
Power consumption: 120 W at idle, 1025 W maximum (7 channels driven)

A beautiful piece of equipment for audiophiles. It dates from 2007 and works perfectly. It delivers exceptional sound for a great home cinema or music experience. It is a “high-current” amplifier, meaning it can drive demanding speakers and deliver a powerful sound presence at any volume. Both remote controls and the manual are included with the amplifier. There are several ways to enjoy surround sound: route the audio through an optical connection, enable LOGIC 7 (an improved equivalent of Pro Logic IIx), or use the analog RCA inputs. The HDMI inputs do not support compressed surround formats (Dolby Digital, DTS), only 2.0 PCM.

LOGIC 7
An active matrix decoding system developed by Lexicon and used in many Harman products. It can convert two-channel signals into five- or seven-channel signals. The system offers modes optimized for video and music soundtracks, as well as a conventional stereo music recording function. It was specially designed for recording studios characterized by a powerful front soundstage, while also reproducing sounds perceived beyond the room’s walls. A car version of this system accommodates the unique listening conditions inside vehicles. See Encoder/Decoder Matrix

High Current Capacity (HCC)
The number of watts per channel is an incomplete measure of an amplifier’s power. In terms of dynamics and impact, current is what matters. HCC is a general design approach that encompasses everything from transformer design and capacitor size to discrete output circuits and minimal use of negative feedback. This electronic system, comparable to a large-displacement, high-torque racing engine, produces audible results. You get superb transient response, tighter bass, and a stronger presence at any volume.

AUDIO
Continuous average power in stereo mode (FTC) per channel:
80 W (20 Hz–20 kHz, at < 0.07% THD, with 2 channels driven into 8 ohms)
6-channel surround modes, power per channel:
Front left and right channels: 65 W (< 0.07% THD, 20 Hz–20 kHz into 8 ohms)
Center channel: 65 W (< 0.07% THD, 20 Hz–20 kHz into 8 ohms)
Surround channels (side L & R, rear): 65 W (< 0.07% THD, 20 Hz–20 kHz into 8 ohms)
Linear input sensitivity/impedance (high level): 200 mV / 47 kohms
Signal-to-noise ratio (IHF-A): 100 dB
Adjacent-channel separation in surround system:
Dolby Pro Logic I and II: 40 dB
Dolby Digital: 55 dB
DTS (Digital Theater System): 55 dB
Frequency response at 1 W (0 dB, -3 dB): 10 Hz–130 kHz
High-frequency instantaneous current capability: ± 40 A
Slew rate: 40 V/µsec

Connections
8 digital audio inputs, 2 outputs
[6 rear-panel inputs (3 optical, 3 coaxial), 2 front-panel inputs (optical, coaxial switchable to output), 2 rear-panel outputs (optical, coaxial)]
5 Composite/S-Video audio/video inputs (V1, V2, V3, V4, DVD), 2 analog audio inputs (CD, TAPE)
Independent 7.1-channel audio inputs (8 Channel Direct Inputs)
7.1-channel pre-out audio outputs
Front-panel audio/video inputs, duplicate Composite/S-Video and switchable to output (V4)
RS232 port
1 connector for “The Bridge” iPod docking station

Settings
- EzSet EQ II parametric equalization: EzSet EQ II takes room volume and design into account to automatically adjust speaker levels, delays, sizes, and crossover frequencies, as well as those of two subwoofers.
- Quadruple Crossover Bass Manager
Allows different bass crossover frequencies to be configured according to the speakers in use: Group 1: Front left and right speakers; Group 2: Center speaker; Group 3: Surround speakers (SR, SL); Group 4: Surround back (SBR, SBL).
- Digital Bass Management
Converts analog signals received through the “8CH direct input” jacks to digital, and allows the AVR settings to be precisely adjusted for the type of speakers in use (Small / Large).
- Subwoofer crossover frequency: 40, 60, 80, 100, 120, and 200 Hz.
- Multi-room audio and integrated multi-zone amplification: allows an additional amplifier to be connected to provide audio in another room. In 5.1 use, the 2 surround back channels (SBR and SBL) can be assigned to the multi-room zone and amplified directly by the AVR.
- A-Bus Ready / RS232: A-Bus allows the amplifier to be controlled remotely using an A-Bus patented, directly amplified keypad. The RS232 port allows control of the amplifier through high-end home automation systems and also enables software updates.

Power supply: AC 220–240 V / 50 Hz
Power consumption: 120 W at idle, 1025 W maximum (7 channels driven)

Details

Era
After 2000
Brand
Harman Kardon
Model
AVR 445
Multiple models
No
Physical condition
Excellent
Number of objects
1
Includes
+ Extra item (see description), Original user manual, Power cord
Serial number
TF00320604
Year of manufacturing
2007
Weight
177 g
Functional condition
Tested and working/playable
Height
165 mm
Width
440 mm
Depth
435 mm
FranceVerified
1
Object sold
Private

Similar objects

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

For you in

Audio Equipment

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​