Nro. 52552185

Ei enää saatavilla
Piaggio - Vespa Gigante - 125 cc - 1951
Tarjousten tekeminen suljettu
129 viikkoa sitten

Piaggio - Vespa Gigante - 125 cc - 1951

Piaggio Vespa Gigante – ‘51 model, handcrafted in 2011. Replica of the one built by Corradino d’Ascanio for advertising purposes and presented at the 1951 Fiera del Ciclo e Motociclo in Milan in the presence of the President of the Republic. Made in 2:1 scale which, in fact, corresponds to a volume and weight 8 times greater than the ‘standard’ version. Dimensions: Length 360 cm; Width 140 cm; Height 200 cm. Weight: 900 kg. The construction took 8 months, with a total of 2000 working hours, in addition to the design phase. Spacial features: - Bodywork: handmade by panelbeater - Engine: aluminium crankcase castings, handcrafted steel parts (cylinder, fan/flywheel). - Other handmade steel parts: seats, starter lever, brake pedal, handlebars and lever supports, carburettor, fuel cap, air lever - Cast aluminium parts: air grip, handlebar controls, rubber footpeg bar mountings - Custom-made rubber parts with specific moulds: grips, rubber footpeg bars, brake and starter pedal rubber, bonnet seals, clutch cable guards. Two stabilising wheels were installed for safety reasons. Historical notes: Enrico Piaggio’s aim was to make the Vespa part of the ‘Myth’ and he commissioned Corradino d’Ascanio. Playing on the difference between ‘vision’ and ‘perception’, D’Ascanio invented a Vespa that deceived those who saw it. In fact, the human brain didn’t perceive a giant Vespa with a normal person on it, but a normal Vespa with a miniature person on it. The ‘Vespone’ toured Italy for advertising purposes in 1951-52 and was extremely successful. D’Ascanio had thus managed to find a place in the ‘Myth’ for the Vespa. Located in Macerata – Italy. Transport is facilitated by an experienced transporter. The exact estimate of the costs will be notified after the auction. Approximately: up to 1000 km, €1500 – 1000 to 2000 km, approx. €2500. It has some small oxidation spots in some chrome parts (e.g. seat springs). The Vespa Gigante is a sculpture, it does not have any type of working engine, it is not a vehicle The original 1:1 Vespa is not included in the lot.

Nro. 52552185

Ei enää saatavilla
Piaggio - Vespa Gigante - 125 cc - 1951

Piaggio - Vespa Gigante - 125 cc - 1951

Piaggio Vespa Gigante – ‘51 model, handcrafted in 2011.

Replica of the one built by Corradino d’Ascanio for advertising purposes and presented at the 1951 Fiera del Ciclo e Motociclo in Milan in the presence of the President of the Republic.

Made in 2:1 scale which, in fact, corresponds to a volume and weight 8 times greater than the ‘standard’ version.

Dimensions:
Length 360 cm;
Width 140 cm;
Height 200 cm.
Weight: 900 kg.

The construction took 8 months, with a total of 2000 working hours, in addition to the design phase.

Spacial features:
- Bodywork: handmade by panelbeater
- Engine: aluminium crankcase castings, handcrafted steel parts (cylinder, fan/flywheel).
- Other handmade steel parts: seats, starter lever, brake pedal, handlebars and lever supports, carburettor, fuel cap, air lever
- Cast aluminium parts: air grip, handlebar controls, rubber footpeg bar mountings
- Custom-made rubber parts with specific moulds: grips, rubber footpeg bars, brake and starter pedal rubber, bonnet seals, clutch cable guards.

Two stabilising wheels were installed for safety reasons.

Historical notes:
Enrico Piaggio’s aim was to make the Vespa part of the ‘Myth’ and he commissioned Corradino d’Ascanio. Playing on the difference between ‘vision’ and ‘perception’, D’Ascanio invented a Vespa that deceived those who saw it. In fact, the human brain didn’t perceive a giant Vespa with a normal person on it, but a normal Vespa with a miniature person on it. The ‘Vespone’ toured Italy for advertising purposes in 1951-52 and was extremely successful. D’Ascanio had thus managed to find a place in the ‘Myth’ for the Vespa.

Located in Macerata – Italy.
Transport is facilitated by an experienced transporter.
The exact estimate of the costs will be notified after the auction.
Approximately: up to 1000 km, €1500 – 1000 to 2000 km, approx. €2500.

It has some small oxidation spots in some chrome parts (e.g. seat springs).

The Vespa Gigante is a sculpture, it does not have any type of working engine, it is not a vehicle

The original 1:1 Vespa is not included in the lot.

Aseta hakuvahti
Aseta hakuvahti saadaksesi ilmoituksia, kun uusia osumia löytyy.

Tämä esine oli esillä kohteessa

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

Näin ostat Catawikistä

Lue lisää ostajan suojastamme

      1. Löydä jotain erityistä

      Selaa tuhansia asiantuntijoiden valitsemia erikoisesineitä. Tutustu jokaisen erityislaatuisen esineen kuviin, tietoihin ja arvioituun arvoon. 

      2. Tee korkein tarjous

      Löydä jotain, josta pidät ja tee siitä korkein tarjous. Voit seurata huutokauppaa loppuun asti tai antaa järjestelmämme tehdä tarjoukset puolestasi. Sinun tarvitsee vain asettaa enimmäishinta, jonka olet halukas maksamaan tietystä esineestä. 

      3. Maksa turvallisesti

      Pidämme maksusi tallessa, kunnes olet vastaanottanut ostoksesi ehjänä ja hyvässä kunnossa. Käytämme luotettavaa maksujärjestelmää kaikkien maksutapahtumien käsittelyyn. 

Onko sinulla jotain samankaltaista myytäväksi?

Olit sitten ensi kertaa verkkohuutokaupassa tai ammattimyyjä, voimme auttaa sinua ansaitsemaan erikoisesineistäsi enemmän.

Myy esineesi