Arte

Interiores e decoração

Joalharia e pedras preciosas

Relógios, canetas e isqueiros

Moda

Moedas e selos

Banda desenhada e animação

Carros, motos e automobilia

Vinho, uísque e bebidas espirituosas

Arte tribal e asiática

Cromos e cartas

Brinquedos e modelismo

Arqueologia e história natural

Desporto

Música, cinema e câmeras

Livros e memorabilia histórica

A ciência imersiva do equipamento de áudio trazida até si por {name}

Ariel Cabello

A Pioneer icon: PL-50 with a magnificent burl walnut plinth, a true gem! Spins and locks perfectly at both speeds. Armlift works flawlessly. Technically and optically in beautiful condition. Including the Pioneer JP-505 headshell and tone arm cable. Consider the element a gift since the technical condition can not be guaranteed. It concerns a Japanese import model. Vinyl not included. 


NO RESERVE PRICE. Enjoy the bidding!

Info:

There were 2 types, the PL-50 of the normal version and the PL-50L with the newly developed moving coil system silent lift-up function.

In order to pursue the limit of rotational accuracy, we have adopted an SH rotor type motor in which the rotor support point (bearing) located at the bottom of the motor is moved just below the turntable. By this, we have succeeded in almost matching the position of the center of gravity of the motor with that of the support point.
As a result, the reverse conical motion with the lowest part of the motor shaft as a fulcrum, which occurs due to the slight clearance between the motor shaft and bearing, which could not be prevented by the conventional structure in which the position of the center of gravity and the position of the fulcrum were greatly deviated, is eliminated, and excellent rotational characteristics are secured.
In addition, a quartz PLL DC servo Hall motor with a starting torque of 1.6kg-cm is used to eliminate load fluctuations caused by resistance received by the needle tip from the recording sound groove, and a 330kg-cm DC servo Hall motor is used to eliminate load fluctuations caused by resistance received by the needle tip from the recording sound groove.2A large turntable with a diameter of 31 cm has been adopted.
In the magnetic pole switching mechanism of the motor, three Hall elements developed by Pioneer are used, and other fine parts are finished with micron-order machining accuracy to eliminate minute noise.

A special anti-vibration agent has been applied to the back of the turntable to prevent noise that adversely affects sound quality.

In order to eliminate low-frequency resonance and achieve high sensitivity at the same time, a silicon oil braking tone arm (capable of on/off operation) is adopted.
This is a structure in which a damping fin (ring shape) is submerged in silicon oil injected into the oil cup at the upper part of the arm shaft, and damping is applied. Moreover, by cutting the tip of the fin at 45 degrees, it is designed to simultaneously apply appropriate braking in both horizontal and vertical directions.
As a result, the Q (resonance sharpness) of the low-frequency resonance is reduced, and the mechanical impedance of the tone arm is flattened. In addition, the cross-modulation distortion is greatly improved by the synergistic effect of the mass concentration method that brings the main weight of the arm closer to the rotation axis, and clear reproduction sound is realized in the entire audible band.

The arm base uses a heavy weight arm base made of die cast with a stabilizer effect, and the arm is firmly fixed to suppress partial resonance.

Long type arm with effective length of 250 mm is adopted.

A high-density cabinet with a combination of natural wood (Marble Ebony finish) and 4-layered solid board is adopted, which effectively prevents the cabinet from shaking due to the reaction of the rotational moment of the high torque motor.
The insulator is equipped with a newly developed low-center-of-gravity structure insulator that provides excellent stability against external vibrations such as howling.

By using a damping adjustment adapter sold separately, it becomes a braking level variable arm similar to PL-70, and the braking amount can be adjusted according to the compliance of the cartridge.
When mounting a cartridge with heavy weight (Orthophone SPU-GT type, etc.), it is recommended to use an exchange weight (sold separately).

The PL-50L is equipped with a silent lift-up mechanism that does not produce mechanical sounds.
This is a moving coil system that applies the operation principle of a speaker to the elevation mechanism that moves the arm up and down. It operates without contact with DC voltage.
In addition, the end position of the recording sound groove is detected by non-contact detection using a Hall element Hall element and a magnet inside the arm shaft is adopted, so that no side pressure is generated and sensitivity of the arm is not impaired.


Type Cartridgeless player system
Phono Motor Section
Motor Quartz PLL DC servo Hall motor
Drive system Direct drive
Bearing structure SH / rotor system
Turntable Diameter 31cm
Turntable inertia mass 330kg-cm2(including turntable seats)
Number of revolutions 33 1/3, 45 rpm
Rotational speed change Electronic with short stroke switch
Uneven rotation 0.012% or Less (PL-50L, WRMS/FG Direct Reading Method)
0.013% or Less (PL-50, WRMS/FG Direct Reading Method)
0.023% or Less (WRMS/JIS)
S/N 78 dB or more (DIN-B)
65 dB or More (JIS)
Load variation 0% (Needle Pressure 200g or Less)
Start-up characteristic 1/3 turn or less
Starting torque 1.6kg-cm
Speed detection method All-round integration method FG
Rotational speed deviation Not more than 0.002%
Drift Time drift : 0.00008% / h
Temperature drift : 0.00003% / ° C.
Brake mechanism Pure electronic
Tone Arm Section
Type Oil braking system static balance S-shaped pipe arm
Effective length 250mm
Overhang 14mm
Tracking error + 2.1 °, -1.2 °
Needle pressure adjustment Weight 1 Rotation 1g (0.1g scale)
Applicable Cartridge Dead Weight 4g ~ 13g (when using the attached shell)
Height adjustment range + / - 3 mm
Head shell Aluminum Impact Press Head Shell, Dead Weight 10.5g

Attachment mechanism Quartz lock indicator
Quick stop
Silent Lift Up (Electronic Type, PL-50L Only)
Semiconductors used Quartz : 1
IC:6
Hall element : 4 (3 for PL-50)
LED : 4 (3 for PL-50)
Transistor : 4
Diode : 4
Power 100 V
AC, 50Hz/60Hz
Power consumption PL-50:8W
PL-50L:13W

Weight 15kg

Bom - Número de artigos: 1 - Incluindo: Gira-discos - Sem extras

Pioneer - PL-50 Gira-discos

Cartazes e decoração de parede

Preço de reserva

Sem preço de reserva

Comprar agora

Data de fim

28 maio

amanhã

domingo

2 junho

quarta-feira

hoje

29 maio

terça-feira

4 junho

segunda-feira

5 junho

18 junho

1 junho

11 junho

8 junho

31 maio

30 maio

Orçamento

Até

Localização

Itália

Espanha

Holanda

França

Alemanha

Bélgica

Reino Unido

Suíça

Áustria

Japão

Grécia

Polônia

Dinamarca

Hungria

Romênia

Chipre

Portugal

Turquia

Tamanho

M (40–80 cm)

L (80–120 cm)

S (menos de 40 cm)

XL (120–160 cm)

XXL (mais de 160 cm)

Dimensões

Altura

Largura

Profundidade

Marca

Martini

Michelin

Mercedes-Benz

Fontana Arte

Objeto

Cartaz

Impressão

Cartaz original de 1ª impressão

Cartaz publicitário

Design de cartazes

Cartaz de exposição

Litografia

Obra de arte

Giclée

Reimpressão de cartaz (reedição)

Cartaz de evento

Cartaz de música

Cartaz de desporto

Cartaz de automobilia

Lobby Card

Decoração de parede

Fotografia

Folheto

Sinal publicitário

Cartaz de filme

Judaica

Memorabilia / Merchandising de música

Memorabilia / Merchandising de cinema e televisão

Livro de fotografia

Impressão de uma única folha

País de origem

Estados Unidos

Desconhecido

México

América do Norte

Canadá

Austrália

Brasil

Polónia

Suécia

Irlanda

Chile

Material

Papel

Madeira

Lona

Linho

Vidro

Estado

A (excelente - perfeito estado)

A- (bem - imperfeições minúsculas)

Excelente estado

B+ (bom - pequenas imperfeições)

Bom estado

B (razoável - imperfeições óbvias)

B- (justo - defeitos perceptíveis)

Boas condições

Como novo - não foi utilizado

C (má - defeitos significativos)

Bela

Excelente estado - muito pouco usado com sinais mínimos de envelhecimento e desgaste

Vários estados (diversos itens)

Muito bom

Quase novo

Bom estado - usado com pequenos sinais de envelhecimento e manchas

Período

década de 1980

década de 1990

década de 1970

1990-2000

Depois de 2020

década de 1950

década de 2010

década de 2000

século XIX

2000-2010

década de 1960

Década de 2020

década de 1920

2010-2020

de 1900

1980-1990

década de 1940

década de 1930

1960-1970

1890s

1970-1980

1950-1960

1910-1920

1910s

1930-1940

Tema

Design gráfico

Vintage

Memorabilia

Culinária, comida e bebida

Artistas

Edições Comemorativas

Viagens / exploração

Desporto, jogos e passatempos

Transporte

Arte urbana

Animais

Cultura pop

Arte aplicada (design)

Retrato

Celebrações

Cidades e paisagens

Música

Paisagens

Hipódromos

Obra de arte original

Estilo

Pop art

Moderno

Arte de rua

Contemporâneo

Arte nova

Abstrato

Neoexpressionismo

Arte déco

Expressionista

Realismo

Surrealismo

Simbolismo

Cartazes e decoração de parede

Este objeto já não está disponível, mas ainda há muito para explorar

Pioneer - PL-50 Gira-discos

1811 objetos

Coleções relacionadas