N.º 100684947

Já não está disponível
Pentagon-1024ZP - Crocodile ZX Spectrum Sinclair - Computador
Licitação fechada
Há 2 dias

Pentagon-1024ZP - Crocodile ZX Spectrum Sinclair - Computador

Computer ZX Spectrum - Pentagon-1024ZP - Crocodile - new motherboard , full works , joystick , keyboard, hdmi adapter, usb keyboard, ZX Spectrum - Divmmc + sd card ( game + software) , PC case ZX Spectrum - Pentagon-1024ZP Crocodile The board was developed by me specifically for installation in a PC case, the board format of the MicroATX standard is 243.84 mm * 243.84 mm. Of the board features: RAM 1024 kB on a pair of SRAM chips with full addressing (not imitation DRAM), ROM at 512 kB (8 banks of 64 kB), digital INT, digital boundary correction, 4 NemoBus slots with a switchable BDI blocking signal for Divmmc operation, NemoIDE CD/HDD controller on the board, reset scheme implemented in bank 0, Turbo Sound sound on a pair of original Yamaha YM2149F, Kempston 8bit joystick. There is a RAM 128/1024 kB mode switch. Convenient connection to RGB to VGA/HDMI converters with switching of KSI/SSI/Sync jumpers, as well as with selection of pixel clock frequency 14/3.5 MHz. Connectors for video output, keyboard connection, Kempston joystick, audio output and TAPEIN/TAPEOUT are located in the "usual" place for the PC case and are also duplicated with the pins on the board. ATX24(20) pin power connector. The KR1818VH93 emulator is installed as the FDC controller (project of Evgeny Ugryumov). Tested operation with FDD 3.5 emulator and OpenFlop alias Gotek. - USB keyboard adapter - RGB to HDMI adapter - ZX Spectrum - Divmmc + sdcard

N.º 100684947

Já não está disponível
Pentagon-1024ZP - Crocodile ZX Spectrum Sinclair - Computador

Pentagon-1024ZP - Crocodile ZX Spectrum Sinclair - Computador

Computer ZX Spectrum - Pentagon-1024ZP - Crocodile - new motherboard , full works , joystick , keyboard, hdmi adapter, usb keyboard, ZX Spectrum - Divmmc + sd card ( game + software) , PC case


ZX Spectrum - Pentagon-1024ZP Crocodile
The board was developed by me specifically for installation in a PC case, the board format of the MicroATX standard is 243.84 mm * 243.84 mm. Of the board features: RAM 1024 kB on a pair of SRAM chips with full addressing (not imitation DRAM), ROM at 512 kB (8 banks of 64 kB), digital INT, digital boundary correction, 4 NemoBus slots with a switchable BDI blocking signal for Divmmc operation, NemoIDE CD/HDD controller on the board, reset scheme implemented in bank 0, Turbo Sound sound on a pair of original Yamaha YM2149F, Kempston 8bit joystick. There is a RAM 128/1024 kB mode switch. Convenient connection to RGB to VGA/HDMI converters with switching of KSI/SSI/Sync jumpers, as well as with selection of pixel clock frequency 14/3.5 MHz. Connectors for video output, keyboard connection, Kempston joystick, audio output and TAPEIN/TAPEOUT are located in the "usual" place for the PC case and are also duplicated with the pins on the board. ATX24(20) pin power connector. The KR1818VH93 emulator is installed as the FDC controller (project of Evgeny Ugryumov). Tested operation with FDD 3.5 emulator and OpenFlop alias Gotek.

- USB keyboard adapter
- RGB to HDMI adapter
- ZX Spectrum - Divmmc + sdcard

Licitação fechada
Toby Wickwire
Especialista
Estimativa  € 550 - € 650

Objetos semelhantes

Para si em

Videojogos e computadores

Definir um alerta de pesquisa
Defina um alerta de pesquisa para ser notificado quando surgirem novos resultados.

Este objeto foi mostrado em

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

Como comprar na Catawiki

Saber mais sobre a nossa proteção do comprador

      1. Descubra algo especial

      Navegue por milhares de objetos especiais selecionados por especialistas. Veja as fotos, os detalhes e o valor estimado de cada objeto especial. 

      2. Faça a licitação vencedora

      Encontre algo que adora e faça a licitação vencedora. Pode acompanhar o leilão até ao fim ou deixar o nosso sistema licitar por si. Apenas tem de definir o valor máximo que está disposto a pagar. 

      3. Faça um pagamento seguro

      Pague o seu objeto especial e mantemos o seu pagamento seguro até o seu objeto chegar são e salvo. Utilizamos um sistema de pagamento confiável para processar todas as transações. 

Tem algo parecido para vender?

Quer tenha entrado agora no mundo dos leilões online ou venda a título profissional, podemos ajudá-lo a ganhar mais pelos seus objetos especiais.

Venda o seu objeto