Luxman - L-4 Amplificador integrado de estado sólido





Proteção do comprador da Catawiki
O seu pagamento está seguro connosco até receber o seu objeto.Ver detalhes
Trustpilot 4.4 | 138166 avaliações
Classificada como Excelente na Trustpilot.
Luxman L-4 amplificador integrado da Série Studio Standard, fabricado no Japão entre 1980 e 1982, peso 10 kg, em muito bom estado físico e testado funcionando, incluindo alimentação.
Descrição fornecida pelo vendedor
Amplificatore Luxman L-4 usato funzionante, in ottimo stato, (ha un morsetto delle casse dietro che gira a vuoto comunque non influisce sul funzionamento, vedi foto) le casse vengono rilevate e si sentono bene, anche così i fili si mantengono nell alloggio, una caratteristica particolare come vedete dalle foto ha le porte RCA sotto, consiglio di metterlo su una base con del vuoto al centro altrimenti potrebbero danneggiarsi le porte.
Caratteristiche dell amplificatore
Manufacturer: Luxman
Model: L-4
Type: Integrated amplifier
Model range: Studio Standard Series
Years of manufacture: 1980 - 1982
Made in: Japan
Color: Silver, Black
Dimensions: 438 x 105 x 289 mm (WxHxD).
Weight: 9.5 kg
Connections
Number of inputs:
Phono (MM): 2.5 mV/50 kOhm
Tuner: 150 mV/50 kOhm
Tape Play 1, 2: 150 mV/50 kOhm
Aux: 150 mV/50 kOhm
Main In: 800 mV
Number of Outputs:
Tape Rec:
Pre Out:
Headphones:
2 pairs of speakers
Technical Data
Continuous power (at distortion factor)
8 Ohm: 2 x 55 W (RMS, 20 Hz - 20 kHz)
4 Ohm:
Dynamic power
8 Ohm:
4 Ohm:
Total harmonic distortion: < 0.02 %
Attenuation factor:
Frequency response: 10 Hz - 100 KHz, - 1 dB
Signal-to-noise ratio:
Phono: 92 dB
Tuner, Tape, Aux: 95 dB
Crosstalk attenuation:
Phono: 70 dB
Tuner, Tape, Aux: 80 dB
Tone control:
Bass: ± 11 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
Loudness: yes
High Filter: yes, - 6 dB / octave at 7 kHz
Low Filter (Subsonic): yes, - 6 dB / octave at 25 Hz
Mute: no
Special Features
Tape monitor
Dubbing
Mono / Stereo switch
Amplificatore Luxman L-4 usato funzionante, in ottimo stato, (ha un morsetto delle casse dietro che gira a vuoto comunque non influisce sul funzionamento, vedi foto) le casse vengono rilevate e si sentono bene, anche così i fili si mantengono nell alloggio, una caratteristica particolare come vedete dalle foto ha le porte RCA sotto, consiglio di metterlo su una base con del vuoto al centro altrimenti potrebbero danneggiarsi le porte.
Caratteristiche dell amplificatore
Manufacturer: Luxman
Model: L-4
Type: Integrated amplifier
Model range: Studio Standard Series
Years of manufacture: 1980 - 1982
Made in: Japan
Color: Silver, Black
Dimensions: 438 x 105 x 289 mm (WxHxD).
Weight: 9.5 kg
Connections
Number of inputs:
Phono (MM): 2.5 mV/50 kOhm
Tuner: 150 mV/50 kOhm
Tape Play 1, 2: 150 mV/50 kOhm
Aux: 150 mV/50 kOhm
Main In: 800 mV
Number of Outputs:
Tape Rec:
Pre Out:
Headphones:
2 pairs of speakers
Technical Data
Continuous power (at distortion factor)
8 Ohm: 2 x 55 W (RMS, 20 Hz - 20 kHz)
4 Ohm:
Dynamic power
8 Ohm:
4 Ohm:
Total harmonic distortion: < 0.02 %
Attenuation factor:
Frequency response: 10 Hz - 100 KHz, - 1 dB
Signal-to-noise ratio:
Phono: 92 dB
Tuner, Tape, Aux: 95 dB
Crosstalk attenuation:
Phono: 70 dB
Tuner, Tape, Aux: 80 dB
Tone control:
Bass: ± 11 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
Loudness: yes
High Filter: yes, - 6 dB / octave at 7 kHz
Low Filter (Subsonic): yes, - 6 dB / octave at 25 Hz
Mute: no
Special Features
Tape monitor
Dubbing
Mono / Stereo switch

