A High end integrated amplifier from a high end company, Plinius 8200 it's a serious amplifier for High end users. Capable of delivering 180w in 8 ohm this amplifier surpases all expectations, driving any speaker with ease and delivering a wide stereo image, with incredible good soundstage,.musical, yet very transparent and detailed will please every listtener. PHONO Board IS A GEM OF SOUND. Specs: FREQUENCY RESPONSE: 20Hz to 20kHz ±0.2dB. -3dB at 5Hz and -3dB at 70kHz. DISTORTION: Typically THD at rated power. 0.2% THD and IM worst case prior to clipping. SATURATION: 200 Watts per channel or greater into 8Ω. 300 Watts per channel or greater into 4Ω. CURRENT OUTPUT: 35A short duration peak per channel. Fuse protected. RISE TIME: Typically 4μs. SLEWING: 50V/μs. HUM & NOISE: 90dB below rated output 20Hz to 20kHz unweighted. INPUT SENSITIVITY: 300mV RMS for rated output at 1kHz. 1.5mV RMS on Phono low gain setting. 0.75mV on Phono high gain setting. INPUT IMPEDANCE: 47kΩ. INPUT OVERLOAD: 5V RMS. PHONO STAGE GAIN (PHONO INPUT TO PRE-OUT): 61dB on high gain setting, 54dB on low gain setting. RATED PRE OUT LEVEL: 1.5V RMS into 47kΩ or higher. Maximum 6V RMS into 10kΩ or higher. PRE OUT SOURCE IMPEDANCE: Typically 5kΩ. TAPE OUTPUT LEVEL: 190mV at 200Ω. Tape loop muting at 5V RMS input. HEIGHT: 120mm WIDTH: 450mm DEPTH: 380mm WEIGHT: 15.5 kg