Roland - Număr de articole: 1 - Amplificator chitară - Japonia (Fără preț de rezervă)
03
zile
13
ore
06
minute
09
secunde
40alte persoane se uită la acest obiect
 Licitant 2230 | 15 € | |
|---|---|---|
 Licitant 8062 | 10 € | |
| Licitant 2230 | 9 € | |
Protecția cumpărătorului Catawiki
Plata dvs. este în siguranță la noi până când primiți obiectul. Afișare detalii
Trustpilot 4.4 | 122028 recenzii
Evaluat excelent pe Trustpilot.
Acest Roland Cube-20 timpuriu din anii șaptezeci, fabricat în Japonia, este testat și funcțional, cu 20 W ton solid-state și reverberație cu arc, cântărind aproximativ 7,5 kg.
Rezumat asistat de inteligență artificială
Descriere de la vânzător
Brand: Roland
Type of instrument/accessory: Guitar amplifier
Made in: Japan
Model: CUBE-20 (early model)
Era: Late 1970s
Colour: Cream / Off-white
Serial number: Not applicable
Type of wood body/neck: Not applicable (solid-state amplifier)
Type of tuners / pickups / neck joint: Not applicable
Parts replaced:
– Normal input jack has been replaced with a new part.
– Headphone jack and PCB were removed by a previous owner (non-functional).
All other parts appear original.
Damage / wear:
– Numerous scratches, scuffs, stains, and rust spots on the exterior
– Rusted areas have been treated with rust converter
– Cosmetic wear consistent with a 45+ year old amplifier
– Please check photos for full condition details
Repairs needed:
– None for normal use; the amplifier is fully working
– Future maintenance may be required due to vintage age
– Headphone output is not functional (removed)
Description
This is a vintage Roland CUBE-20, one of the early 20W models released in the late 1970s.
Compact yet powerful, this amplifier is well known for its clear, honest solid-state tone and its ability to handle not only guitars but also keyboards thanks to its neutral frequency response.
The design features a real spring reverb, providing deep and warm ambience from a compact unit.
The cabinet layout places the power transformer at the bottom for stable power delivery, while the reverb tank is mounted in the upper chamber to avoid vibration from the speaker.
The amp produces a natural overdrive when using the OVER DRIVE input, while the NORMAL input delivers clean and articulate tones.
Specifications
Output: 20W
Speaker: 20 cm × 1
Inputs: 2 (Overdrive / Normal)
Controls: Volume, Treble, Middle, Bass, Reverb, Master Volume
Power: AC 100V / 50–60Hz / 17W
Dimensions: 285mm (W) × 327mm (H) × 173mm (D)
Weight: approx. 7.5 kg
Headphone output: Removed / not available
Functionality
Produces sound normally
Both input channels work
No noticeable pot noise (“scratchy” knobs) at listing time
Reverb works properly
No issues affecting playability
Vintage electronics—future servicing may be needed as with any amp of this age
Shipping
The amplifier will be carefully wrapped with bubble wrap and packed in a strong cardboard box.
Shipped from Kanagawa, Japan, using Japan Post (Yu-Pack or International Parcel) with tracking.
Estimated package size: 100-size.
Important note
This is a vintage amplifier that has been used for nearly half a century.
There may be imperfections not fully described.
Sold as-is, with no returns, refunds, or complaints accepted.
Please bid only if you understand vintage electronics.
Brand: Roland
Type of instrument/accessory: Guitar amplifier
Made in: Japan
Model: CUBE-20 (early model)
Era: Late 1970s
Colour: Cream / Off-white
Serial number: Not applicable
Type of wood body/neck: Not applicable (solid-state amplifier)
Type of tuners / pickups / neck joint: Not applicable
Parts replaced:
– Normal input jack has been replaced with a new part.
– Headphone jack and PCB were removed by a previous owner (non-functional).
All other parts appear original.
Damage / wear:
– Numerous scratches, scuffs, stains, and rust spots on the exterior
– Rusted areas have been treated with rust converter
– Cosmetic wear consistent with a 45+ year old amplifier
– Please check photos for full condition details
Repairs needed:
– None for normal use; the amplifier is fully working
– Future maintenance may be required due to vintage age
– Headphone output is not functional (removed)
Description
This is a vintage Roland CUBE-20, one of the early 20W models released in the late 1970s.
Compact yet powerful, this amplifier is well known for its clear, honest solid-state tone and its ability to handle not only guitars but also keyboards thanks to its neutral frequency response.
The design features a real spring reverb, providing deep and warm ambience from a compact unit.
The cabinet layout places the power transformer at the bottom for stable power delivery, while the reverb tank is mounted in the upper chamber to avoid vibration from the speaker.
The amp produces a natural overdrive when using the OVER DRIVE input, while the NORMAL input delivers clean and articulate tones.
Specifications
Output: 20W
Speaker: 20 cm × 1
Inputs: 2 (Overdrive / Normal)
Controls: Volume, Treble, Middle, Bass, Reverb, Master Volume
Power: AC 100V / 50–60Hz / 17W
Dimensions: 285mm (W) × 327mm (H) × 173mm (D)
Weight: approx. 7.5 kg
Headphone output: Removed / not available
Functionality
Produces sound normally
Both input channels work
No noticeable pot noise (“scratchy” knobs) at listing time
Reverb works properly
No issues affecting playability
Vintage electronics—future servicing may be needed as with any amp of this age
Shipping
The amplifier will be carefully wrapped with bubble wrap and packed in a strong cardboard box.
Shipped from Kanagawa, Japan, using Japan Post (Yu-Pack or International Parcel) with tracking.
Estimated package size: 100-size.
Important note
This is a vintage amplifier that has been used for nearly half a century.
There may be imperfections not fully described.
Sold as-is, with no returns, refunds, or complaints accepted.
Please bid only if you understand vintage electronics.
Detalii
Marcă
Roland
Model
CUBE-20
Eră
1900-2000
Țară
Japonia
Stare
Bună
Nr. de articole
1
Includes
No extra's
Greutate
7.5 kg
Testat și funcțional
Testat și funcțional
Vândut de
