Lenco - L75 S Turntable

I propose another customized Lenco 75/S turntable. As you can see from the photos, the old lettering, now illegible, has been covered with a splendid red color applied hot in the body shop. The plinth has been renewed, all internal levers have been checked to completely eliminate the noises that belt-driven turntables sometimes exhibit. The interventions made render this Lenco 75/S very quiet and precise. The shell is an original Lenco and the stylus is new and needs to be run-in, although it has worked about an hour during the turntable setup. This Lenco 75/S is already calibrated and ready to use, but it is likely that after transport the anti-skating will need to be readjusted again. The motor is blocked with two screws with red caps to facilitate transport. Once unpacked, before use, the two screws must be loosened, turning them counterclockwise until the slightest resistance is reached before placing the platter. The dust cover is NEW, while the hinges and fittings are well preserved as can be seen very clearly in the photos. The RCA connections and ground wire cabling have been renewed, with the VDE three-prong power plug. The cabling is NOT included in the lot. The speed indicator rod will arrive positioned at 78 rpm to facilitate packing and transport. Everything you see in the photo service is what you will receive. The turntable will be insured and packed in an optimal way to withstand courier shipping.

Technical Specifications

Speed: 33/45/78 rpm
Drive: belt-driven
Wow & Flutter: 0.008% (unweighted), 0.005% (weighted)
Rumble & Hum: 40 dB
Signal-to-Noise Ratio: 60 dB
Platter diameter: 315 mm
Platter weight: 4.0 kg
Total Weight: 10.00 kg
Tonearm "S": 280 mm
Year: 1976/78
Dimensions: 445 x 335 x 155 mm