NAD - 5120 Turntable

NAD5120 Semi-Automatic Turntable Record Deck Classic Including ORTOFON FF15XE Mk.II
I bought the NAD 5120 Semi-Automatic Belt Drive Turntable for myself 40 years ago, in 1985.
Minimalist design, original excellent condition.

NAD 5120 Semi-Automatic Turntable Record Deck Classic + ORTOFON FF15XE Mk.II comes as shown in Photos, no Accessories.

Specifications:
NAD 5120 Semi-Automatic Belt Drive Turntable

TURNTABLE
Drive System: Precision neoprene belt drive
Motor: Synchronous motor (360 rpm with 60 Hz power, 300 rpm at 50 Hz)
Speeds: 33.3 and 45.1 rpm
Speed accuracy: 0.5%
Wow and flutter: 0.07% DIN peak
0.04% WRMS
Signal-to-noise ratio (rumble): -70 dB (DIN B weighted); -43 dB (DIN A unweighted)
Suspension system: Platter and tonearm rigidly mounted on subchassis floatin on high-compiance springs.
Suspension resonance: Below 4 Hz.

TONEARM
Features: Flat, flexible, interchangeable, statically balanced tonearm with Dynamic Vibration Absorber.
Operation: Semi-automatic (automatic lift and stop at end of record).
Length: 27.8 cm (10.93 inch) total length; 20.8 cm (8.18 inch) pivot to stylus

Effective mass: 9 grams
Overhang: 19.1 mm
Offset angle: 26 °
Lateral tracking error: Zero at R=63.6 and 119.1 mm
Maximum tracking error: 0.16 °/cm (0.4 °/inch)
Dynamic Vibration with Absorber: Spring-suspended counterweight viscous damping
Cartridge weight: 4 to 8 grams with counter-weight in normal position; 2 to 4 grams with counter-weight assembly reversed
Vertical tracking force: 0 to 3 grams (0 to 30 milliNewtons)
Antiskating range: 0.75 to 3 grams (7.5 to 30 mN)
Cable capacitance: 100 pF

Dimension:
Width: 42 cm
Height: 10.5 cm
Depth: 35.4 cm

Net weight: 5 kg.
Shipping weight: 7 kg.

ORTOFON FF-15 XE MkII cartridges models.
Original Ortofon Stylus , Made in Denmark.

The high output voltage of the FF15 X Mk II makes it a perfect match for receivers and amplifiers with a low sensitivity phono input. The FF15XE Mk II fitted with elliptical diamond. A medium compliance cartridge which means that it can be used with a large number of turntables.
The elliptical diamond provides increased high frequency tracing ability, making this model well qualified to reproduce even the most exacting music. All the above-mentioned Mk II models have a redesigned body with improved shielding and repositioned terminal pins for easy connection. The pins are gold plated and have a new method of press fitting the internal connections for greater reliability and very small contact resistance.
The elliptical diamond provides increased high frequency tracing ability, making this model well qualified to reproduce even the most exacting music.
• Dimensions (WHD)
• 15 x 20 x 30 mm / 0.6 x 0.8 x 1.2 inch
• Notes
• Features:
o Output: 1.0 mV
o Impedance: 800 ohms
o Tracking angle: 15 degrees
o Frequency response: 20 Hz to 20 kHz
o Channel separation: 20 dB
o Channel balance: 2 dB
o Stylus type: elliptical (FF15XE)
o Stylus tip radius: 18 µm x 8 µm (FF15XE)
o Equivalent stylus tip mass: 0.9 mg
o Tracking force range: 1 to 3 g
o Recommended tracking force: 2.0 g
o Replacement stylus: FF15XE.
Net weight: 0.005 kg