Lenco - L75 S Turntable

I propose another customized Lenco 75/S turntable. As you can see from the photos, the old, now illegible lettering has been covered with a splendid red color applied hot in the body shop. The plinth has been renewed, all internal levers have been checked to completely eliminate the noises that belt-driven turntables sometimes exhibited. The interventions made this Lenco 75/S very quiet and precise. The shell is an original Lenco, and the needle is new and needs to be run-in, although it has worked for about an hour during the setup. This Lenco 75/S is already calibrated and ready to use, but it is likely that after transport the anti-skating may need to be readjusted again. The motor is locked with two screws with red heads to facilitate transport. Once unboxed, before use, the two screws must be loosened, turning counterclockwise until the minimal resistance before placing the platter. The dust cover is NEW, while the hinges and mounting are well preserved as is clearly visible in the photos. The RCA connections and ground wire have been renewed, with the VDE three-pin power plug. The cabling is NOT included in the lot. The speed indicator rod will arrive positioned at 78 rpm to facilitate packing and transport. Everything you see in the photo service is what you will receive. The turntable will be shipped insured and will be optimally packed to be courier-proof.

Technical Specifications

Speeds: 33/45/78 rpm
Drive: belt
Wow & Flutter: 0.008% (unweighted), 0.005% (weighted)
Rumble & Hum: 40 dB
S/N Ratio: 60 dB
Platter diameter: 315 mm
Platter weight: 4.0 kg
Total weight: 10.00 kg
Tonearm "S": 280 mm
Year: 1976/78
Dimensions: 445 x 335 x 155 mm