Lenco - L75 S Turntable

I propose another customized Lenco 75/S turntable. As you can see from the photos, the old lettering, now illegible, has been covered with a splendid red color applied hot in the body shop. The plinth has been renewed, all internal levers have been checked to completely eliminate the noises that belt-driven turntables sometimes exhibited. The interventions made make this Lenco 75/S very quiet and precise. The shell is original Lenco and the cartridge is new and still needs to be run-in because it has worked only one hour during the setup of the turntable. This Lenco 75/S is already calibrated and ready to use, but it is likely that after transport the anti-skating will need to be recalibrated. The motor is locked with two screws with red heads to facilitate transport. Once unpacked, before use, the two screws must be loosened, turning them counterclockwise until the minimum resistance before placing the platter.
The hood is NEW, while the hinges and fittings are well preserved as you can see very clearly from the photos. The RCA connections and ground wire have been renewed, with the three-pin VDE power plug. The cabling is NOT included in the lot. The rod for speed control will arrive positioned at 78 rpm to facilitate packing and transport. Everything you see in the photographic service is what you will receive. The turntable will be shipped insured and will be optimally packed to be courier-proof.

Technical Specifications

Speed: 33/45/78 rpm
Drive: belt
Wow & Flutter: 0.008% (unweighted), 0.005% (weighted)
Rumble & Uhm: 40 dB
S/N Ratio: 60 dB
Platter diameter: 315 mm
Platter weight: 4.0 kg
Total Weight: 10.00 kg
S-shaped tonearm: 280 mm
Year: 1976/78
Dimensions: 445 x 335 x 155 mm