N.º 107909599

Vendido
Candeeiro de teto - Aço
Licitação final
€ 28
Sem preço de reserva
Há 1 semana

Candeeiro de teto - Aço

Almost Scandinavian ... and of outstanding quality. This is a pendant lamp produced by VEB Leuchtenbau Halle, which was part of the Narva Kombinat — the principal lighting manufacturer in the GDR. It is believed that the design was created by Gerd-Heinz Laitko, an industrial designer based in Halle (Saale), who designed residential and commercial lighting for Narva during the 1960s and 1970s. His work is characteristic of East German modernism, being rooted in industrial tradition and functional geometry and using a restrained palette of materials. The lamp has a shallow, slightly domed, lacquered metal shade with a ring of punched ventilation holes around the central E27 socket, which sits under a brushed metal cone connected to a similar ceiling canopy via a wire. The two-tone composition — white below, matte black above and brushed steel at the apex — gives the lamp a graphic quality that stands out against both white ceilings and darker interiors. Narva pieces of this type are exceptionally rare on the market. Examples of this particular design in this condition with intact original hardware almost never surface, even in Germany. To our knowledge, this is the only one available. Its design language places it close to contemporary Scandinavian work, particularly the cone-over-disc geometry of Jo Hammerborg’s designs for Fog & Mørup in Denmark, as seen in the Nova pendant from 1963. Collectors familiar with Bent Karlby’s work for Lyfa will recognise the Troika pendant lamp. Above all, the similarities with the 1951 Arbejdspendel (work pendant) by Danish designer Axel Wedel Madsen for Louis Poulsen place this lamp clearly in the mid-century design world. It was manufactured by VEB Leuchtenbau Halle/Narva Kombinat in Halle (Saale) in the German Democratic Republic. The design is attributed to Gerd-Heinz Laitko (c. 1960–1975). It has been rewired and is ready to shine with a standard E27 bulb. Shade diameter: 35 cm (13.8 in); height: 22 cm (8.7 in). Socket E27, rated 250V/60W. There are minor surface scratches and minimal dents in the shade, likely caused by storage over a period of more than 50 years. It has most probably not been used over longer periods.

N.º 107909599

Vendido
Candeeiro de teto - Aço

Candeeiro de teto - Aço

Almost Scandinavian ... and of outstanding quality.
This is a pendant lamp produced by VEB Leuchtenbau Halle, which was part of the Narva Kombinat — the principal lighting manufacturer in the GDR. It is believed that the design was created by Gerd-Heinz Laitko, an industrial designer based in Halle (Saale), who designed residential and commercial lighting for Narva during the 1960s and 1970s. His work is characteristic of East German modernism, being rooted in industrial tradition and functional geometry and using a restrained palette of materials.

The lamp has a shallow, slightly domed, lacquered metal shade with a ring of punched ventilation holes around the central E27 socket, which sits under a brushed metal cone connected to a similar ceiling canopy via a wire.

The two-tone composition — white below, matte black above and brushed steel at the apex — gives the lamp a graphic quality that stands out against both white ceilings and darker interiors.

Narva pieces of this type are exceptionally rare on the market. Examples of this particular design in this condition with intact original hardware almost never surface, even in Germany. To our knowledge, this is the only one available.

Its design language places it close to contemporary Scandinavian work, particularly the cone-over-disc geometry of Jo Hammerborg’s designs for Fog & Mørup in Denmark, as seen in the Nova pendant from 1963. Collectors familiar with Bent Karlby’s work for Lyfa will recognise the Troika pendant lamp. Above all, the similarities with the 1951 Arbejdspendel (work pendant) by Danish designer Axel Wedel Madsen for Louis Poulsen place this lamp clearly in the mid-century design world.

It was manufactured by VEB Leuchtenbau Halle/Narva Kombinat in Halle (Saale) in the German Democratic Republic. The design is attributed to Gerd-Heinz Laitko (c. 1960–1975).

It has been rewired and is ready to shine with a standard E27 bulb. Shade diameter: 35 cm (13.8 in); height: 22 cm (8.7 in). Socket E27, rated 250V/60W.

There are minor surface scratches and minimal dents in the shade, likely caused by storage over a period of more than 50 years. It has most probably not been used over longer periods.

Licitação final
€ 28
Sem preço de reserva
Francisco Álvarez
Especialista
Estimativa  € 150 - € 220

Objetos semelhantes

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

Para si em

Mobiliário vintage e industrial

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
Definir um alerta de pesquisa
Defina um alerta de pesquisa para ser notificado quando surgirem novos resultados.

Este objeto foi mostrado em

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

Como comprar na Catawiki

Saber mais sobre a nossa proteção do comprador

      1. Descubra algo especial

      Navegue por milhares de objetos especiais selecionados por especialistas. Veja as fotos, os detalhes e o valor estimado de cada objeto especial. 

      2. Faça a licitação vencedora

      Encontre algo que adora e faça a licitação vencedora. Pode acompanhar o leilão até ao fim ou deixar o nosso sistema licitar por si. Apenas tem de definir o valor máximo que está disposto a pagar. 

      3. Faça um pagamento seguro

      Pague o seu objeto especial e mantemos o seu pagamento seguro até o seu objeto chegar são e salvo. Utilizamos um sistema de pagamento confiável para processar todas as transações. 

Tem algo parecido para vender?

Quer tenha entrado agora no mundo dos leilões online ou venda a título profissional, podemos ajudá-lo a ganhar mais pelos seus objetos especiais.

Venda o seu objeto