Artă

Interior și Decorațiuni

Bijuterii si pietre prețioase

Ceasuri, stilouri și brichete

Modă

Monede și Timbre

Benzi desenate și animație

Mașini Clasice, Motociclete și Mașini

Vin, whisky și băuturi spirtoase

Artă Asiatică și Tribală

Cartonașe de schimb

Jucării și Modele

Arheologie și istorie naturală

Sporturi

Muzică, filme și camere video

Cărți și suveniruri istorice

Chitare vintage și moderne puse la dispoziția dvs. de {nume}

Metin Levi

Brand: PMG (formerly PMP)
Model: BUF E-945 SUPER BUFFER Amp
Type: Professional Signal Buffer / Line Driver / Gain Booster
Made in: Japan (estimated)
Serial number: Unknown
Colour: Blue

Rare Japanese professional signal-management unit from the golden age of analogue guitar systems.

This listing is for a PMG (formerly PMP) BUF E-945 “SUPER BUFFER Amp”, a highly specialized signal-management device designed for professional stage and studio applications during the mid-1980s.

Carefully cleaned, inspected, and fully tested, this unit is fully functional and delivers a clear, transparent buffered signal with a clean gain boost, making it suitable for both signal preservation and amplifier driving applications.

Unlike conventional booster pedals that intentionally alter tone or introduce clipping, the BUF E-945 increases gain by changing amplifier gain within the circuit itself. This allows the signal to remain clean and transparent while preserving its original tonal balance and frequency response.

Based on internal component analysis—particularly regulator, rectifier, and capacitor date codes—this unit is estimated to have been manufactured around 1984–1985.

This PMG-branded example appears to represent a slightly later production period than earlier PMP versions while maintaining the same core BUF-series design philosophy.

Key Features & Condition

Model: BUF E-945 SUPER BUFFER Amp
Brand: PMG (formerly PMP)
Made in Japan (estimated)

Power: AC 100V (Japan domestic specification)
Built-in non-detachable power cable

Fully cleaned and carefully inspected

Tested and confirmed working properly

High-quality buffer circuit for improved clarity and frequency response

Maintains signal integrity even over long cable runs (up to approximately 50 meters)

Clean gain boost without intentional distortion

Integrated SEND/RETURN effects loop for external signal routing

Dual A/B outputs for running two amplifiers

Low-noise design suitable for professional applications

Controls / Operation

GAIN BOOST indicator

When the LED is illuminated, the gain boost function is active.

A/B Output selector

The illuminated side indicates the currently selected output.

LOOP BYPASS switch

When the LED is ON, the SEND/RETURN loop is engaged.

When the LED is OFF, the loop is bypassed.

Signal Design (Circuit-Based Behavior)

The gain boost function in the BUF E-945 is implemented by changing amplifier gain within the circuit rather than through a clipping stage.

As a result:

The signal remains clean and transparent
No intentional distortion is generated
Frequency balance is preserved
Ideal for pushing an amplifier into natural overdrive
Maintains clarity throughout complex signal chains

This design reflects a professional buffer / line-driver philosophy focused on signal integrity rather than effect coloration.

Under extreme gain settings, slight natural saturation may occur due to circuit headroom limitations, but this is not a dedicated distortion effect.

Estimated Production Period

Estimated production: circa 1984–1985

The production estimate is based on multiple internal component date codes showing consistent mid-1980s characteristics.

Production Dating Evidence

Voltage Regulator (7912)

Marking: C8413

Likely manufactured during Week 13 of 1984

Strong indication of mid-1984 component production.

Rectifier Diode

Marking: RC203 84

Likely manufactured in 1984

Important power-supply component supporting early-to-mid 1980s dating.

Electrolytic Capacitors

50V 1µF — Marking: 9H06 (BP)

16V 10µF — Marking: E5D1

Likely manufactured during mid-1980s production batches.

Other Components

LF351N operational amplifier

78012 regulator series

Period-correct 1980s components consistent with the estimated production era.

PCB Identification

PCB marking: BUF

This marking corresponds directly to the BUF series and is documented here for reference purposes.

Conclusion of Dating Analysis

Key components—particularly the voltage regulator and rectifier diode—consistently indicate mid-1980s production.

Considering normal component inventory usage and assembly practices, final production is most reasonably estimated as:

circa 1984–1985

This range is considered the most accurate representation of the unit’s manufacturing period.

Production Background & Historical Context

The exact corporate history behind PMP and its later PMG-branded products is not fully documented today, which adds an element of mystery and collectability to surviving examples such as the BUF E-945.

Period catalogues and surviving documentation indicate that PMP products were distributed in Japan through Hoshō Co., Ltd. (宝商株式会社), a respected company known throughout the 1970s and 1980s for handling professional musical equipment and specialized audio products for serious musicians and sound professionals.

Manufacturing is believed to have been associated with D&K'S International Ltd. of Tokyo, a company involved in electronic musical instrument development during the era. Although complete manufacturing records have not survived, available evidence suggests involvement in the design and technical development of professional music equipment in Japan during the late analogue period.

The BUF series emerged during a significant transition in professional guitar systems. Throughout the late 1970s and 1980s, Japanese professional musicians increasingly adopted larger and more sophisticated stage rigs incorporating multiple amplifiers, switching systems, rack-mounted processors, wireless units, and extended cable runs.

As these systems became more complex, signal degradation caused by cable capacitance and impedance mismatch became a serious concern. The BUF E-945 was developed as a professional solution to these problems.

Unlike conventional booster pedals designed primarily to colour the sound or add distortion, the BUF E-945 was engineered as a dedicated signal-management device. Its purpose was to preserve frequency response, maintain signal integrity, improve impedance matching, and provide stable transmission throughout an entire performance system.

Period literature for the BUF series emphasized the ability to maintain signal quality over cable runs approaching 50 metres, reflecting the practical demands of professional stage environments at the time. This focus on transparency and reliability distinguished the BUF series from many contemporary effects units.

The unit also incorporates features aimed directly at professional applications, including dual A/B amplifier outputs, an integrated SEND/RETURN effects loop, and a clean gain boost designed to increase signal level without fundamentally altering tonal character.

Collectors may recognize similarities in design philosophy to other professional signal-conditioning products associated with designers such as Paul Rivera and Lee Jackson. While no evidence currently confirms direct involvement by either designer with the BUF E-945 itself, the unit clearly reflects the same engineering-driven approach that became increasingly important within high-end guitar systems during the 1980s.

Similar signal-management devices were widely used in professional Japanese recording studios, touring systems, and large-scale live performance environments where tonal consistency and reliability were essential. While these products rarely received the attention given to overdrive pedals or amplifiers, they often formed a critical part of professional signal chains.

Today, BUF-series units have become uncommon even within Japan itself, with surviving examples appearing only occasionally on the secondary market. Outside Japan, they are encountered even less frequently. Compared with more widely recognized vintage effects and amplifiers from the same era, BUF-series units remain largely unknown outside specialist circles despite their historical significance.

For collectors of vintage Japanese audio equipment, professional guitar technology, and historically significant signal-processing devices, the BUF E-945 represents a genuinely uncommon survivor from Japan's analogue engineering heritage and the golden age of professional stage systems.

Condition Details

This unit is fully functional and operates as intended.

There are visible signs of age including scratches, paint wear, finish loss, oxidation, and rust on some metal components consistent with vintage equipment.

The unit has been thoroughly cleaned overall while preserving its original character and appearance.

Please refer carefully to the photographs for detailed cosmetic condition.

Size & Weight

Approximate dimensions (excluding cables):

140 mm (W) × 135 mm (D) × 90 mm (H)

Weight: approximately 1000 g

Compared with modern compact effects, the BUF E-945 is relatively large, reflecting the robust professional construction methods of its era.

Power Supply (Important)

This unit operates on AC 100V (Japan domestic specification).

The power cable is permanently attached and cannot be detached.

A suitable step-down transformer is required for operation in countries using different voltage standards.

Included
Unit only

Shipping method: Carefully packed and shipped from Japan.

Shipping is primarily carried out via EMS (Japan Post).

Please note that we only ship to countries where EMS service is available from Japan.
Orders from countries where EMS shipping is not available may be cancelled.

For shipments to the United States, Yamato Transport (International TA-Q-BIN) may be used instead.

Delivery methods may vary depending on the destination country, shipping conditions, and service availability.

Shipping costs are to be paid by the buyer.

Import duties, VAT, customs clearance fees, and any additional charges are the responsibility of the buyer.

Please note that import regulations may vary depending on the destination country.
Some items may be restricted or subject to specific import conditions in certain countries (including parts of the EU).

By placing a bid, the buyer agrees to check and comply with all applicable import regulations and requirements in their country.

Buyers are responsible for ensuring that the selected shipping method is available in their country.

The seller cannot be held responsible for delays, refusals, or additional charges caused by customs regulations.

Orders may be cancelled if shipping or import conditions cannot be met.

We do not ship to P.O. BOX, APO, or FPO addresses.

Bună - Inclusiv: Pedală efect - No extra's

PMG (formerly PMP) - Pedală efect - Japonia  (Fără preț de rezervă)

Instrumente muzicale

Preț de rezervă

Fără preț de rezervă

Data de încheiere

Vineri

Sâmbată

25 Octombrie

Buget

Destinatar

Expeditor

Locație

Italia

Țările de Jos

Germania

Japonia

Belgia

Franța

Spania

Portugalia

Hong Kong

Luxemburg

România

Norvegia

Republica Cehă

Polonia

Suedia

Austria

Bulgaria

Finlanda

Grecia

Irlanda

Danemarca

Estonia

Regatul Unit

Croația

Ungaria

Marcă

Yamaha

Fender

Boss

Gibson

Ibanez

Aria

Hohner

Henri Selmer Paris

Greco

Epiphone

Godin

Takamine

Morris

Suzuki

Squier

Samick

Höfner

Roland

No brand

Casio

Washburn

Marshall

Stagg

Korg

Obiect

Chitară electrică

Vioară

Pedală efect

Chitară acustică

Chitară clasică

Chitară electro-acustică

Arcuș vioară

Flaut

Chitară bas electrică

Amplificator chitară

Saxofon Alto

Arcuș violoncel

Trompetă

Chitară flamenco

Chitară bass electrică cu 4 corzi

Acordeon de pian

Mandolină

Clarinet

Chitară bass electrică cu 5 corzi

Claviatură

Sintetizator claviatură

Gong

Lăută

Harpă

Țara de Proveniență

Statele Unite

Necunoscut

China

Taiwan

Cehia

Coreea de Sud

Canada

Nepal

Olanda

Asia

Brazilia

Indonezia

Elveția

Australia

Columbia

Material

Lemn

Lemn de trandafir

Metal

Molid

Plastic

Arțar

Mahon

Alamă

Abanos

Argint

Aluminiu

Placat cu argint

Lemn - Arțar

Lemn - Abanos

Lemn - Polisandru

Piele

Cedru

Cupru

Arin

Placaj

alte materiale (a se vedea descrierea)

Oțel (inoxidabil)

Sidef

Bronz

Lemn - Mahon

Stare

Bună

Nou Nouț

Excelent

Foarte Bună

Ca nouă

Diverse situaÈ›ii

Precară

Stare excelentă - puțin uzată cu urme minime de folosire și uzură

Stare bună - uzată cu mici semne de uzură și pete

Extra

No extra's

Original case

Hard case

Strings

Gig bag

+ articol extra (vezi descriere)

suport bărbie

Cutie chitară

Soft case

Muștiuc

Strap

Card rutier

Power supply

Power cable

Original parts

Battery

Stand

Jack cable

Tuner

Footswitch

Cutie bas

Guitar cable

Plectrum

Piano stool

Perioadă

1930-1940

1850-1900

Semnătură

Semnat de mână

Semnată personal

Eră

1900-2000

După 2000

1400-1900

Înainte de 1400

Testat și funcțional

Nu a fost testat

Nu a fost testat, numai pentru uz decorativ

Nou Nouț - Inclusiv: Chitară acustică - Strings

Lapaz - Lapaz 002-SB -  - Chitară acustică  (Fără preț de rezervă)

Bună - Inclusiv: Chitară clasică - No extra's

Maestro -  - Chitară clasică - Franța - 1950  (Fără preț de rezervă)

Instrumente muzicale

Acest obiect nu mai este disponibil, dar mai sunt multe altele de explorat

PMG (formerly PMP) - Pedală efect - Japonia (Fără preț de rezervă)

Popular în cadrul Instrumente muzicale

437 obiecte

Colecții similare