Nr 108228514

Såld
Ronson - Utan reservationspris - Tändare - Komposit
Slutgiltigt bud
€ 50
Utan reservationspris
1 vecka sedan

Ronson - Utan reservationspris - Tändare - Komposit

Ronson Petrol Penciliter Louis V Aronson - Art Metal Works inc, Newark, NJ, USA First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson. This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one. The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory. Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below. It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use. Specification Maker: Art Metal Works, Newark, New Jersey, makers of Ronson Model: Penciliter, first generation Period: circa 1934 to 1940 Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case Design: Louis V. Aronson Finish: plating, geometric engine turned body Lead: usually 1.1mm rather than the later 0.9mm Length: 15cm Lighter: petrol, clip-operated DES.Pat.92.996. Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

Nr 108228514

Såld
Ronson - Utan reservationspris - Tändare - Komposit

Ronson - Utan reservationspris - Tändare - Komposit

Ronson Petrol Penciliter
Louis V Aronson - Art Metal Works inc, Newark, NJ, USA
First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents

The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson.

This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one.

The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory.

Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below.

It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use.

Specification

Maker: Art Metal Works, Newark, New Jersey, makers of Ronson
Model: Penciliter, first generation
Period: circa 1934 to 1940
Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case
Design: Louis V. Aronson
Finish: plating, geometric engine turned body
Lead: usually 1.1mm rather than the later 0.9mm
Length: 15cm
Lighter: petrol, clip-operated
DES.Pat.92.996.
Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

Slutgiltigt bud
€ 50
Utan reservationspris
Sebastian Schulze
Expert
Uppskattat pris  € 150 - € 200

Liknande objekt

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

För dig i

Pennor och tändare

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
Skapa en sökbevakning
Skapa en sökbevakning för att få ett meddelande när nya matchningar är tillgängliga.

Detta objekt förekom i

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

Hur du köper på Catawiki

Läs mer om vårt Köparskydd

      1. Upptäck något speciellt

      Bläddra bland tusentals speciella objekt som valts ut av experter. Se foton, detaljer och uppskattat värde för varje speciellt objekt. 

      2. Lägg det högsta budet

      Hitta något du älskar och lägg det högsta budet. Du kan följa auktionen till slutet eller låta vårt system sköta budgivningen åt dig. Allt du behöver göra är att ställa in ett bud på det maximala belopp du vill betala. 

      3. Gör en säker betalning

      Betala för ditt speciella objekt så håller vi din betalning säker tills det anländer välbehållet. Vi använder ett pålitligt betalningssystem för att hantera alla transaktioner. 

Har du något liknande att sälja?

Oavsett om du är ny på onlineauktioner eller säljer professionellt kan vi hjälpa dig att tjäna mer på dina speciella föremål.

Sälj ditt objekt