Luxman - A311 Solid state amplifier





Add to your favourites to get an alert when the auction starts.

Holds dual bachelor's degrees in electronics and physics with 20 years in audio engineering.
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 124625 reviews
Rated Excellent on Trustpilot.
Description from the seller
Luxman A-311 in excellent condition, visually and sonically.
Some signs of use; see photos.
General
Manufacturer: Luxman
Model: A-311
Year of manufacture: 1992-1993
Made in Korea
Color: Gold, Black
Remote control: yes
Electric power consumption:
Dimensions : 438 x 125 x 363 mm (L x H x P).
Weight: 7.6 kg
Number of entries:
Phono (MM): 2.5 mV / 47 kΩ
CD : 150 mV/47 kOhm
DAT : 150 mV/47 kOhm
Band reading: 150 mV/47 kΩ
Auxiliary 1: 150 mV/47 kΩ
Phono / Aux 2: switchable
Number of outputs:
Tape recording:
Headphones:
2 pairs of speakers
System bus
Technical data
Continuous power (at the distortion factor)
8 ohms: 2 x 40 W RMS (0.1%)
8 ohms : 2 x 55 W DIN
4 ohms : 2 x 70 W DIN
Dynamic Power
8 ohms : 2 x 60 W
4 ohms : 2 x 85 W
2 ohms : 2 x 95 W
Total harmonic distortion: 0.01%
Attenuation factor:
Frequency response
Phono (RIAA): 20 Hz – 20 kHz, ±0.5 dB
CD, Tape, Aux: 10 Hz - 60 kHz, ±1 dB Signal-to-Noise Ratio:
Phono : 82 dB
CD, cassette, auxiliary: 97 dB
Stereo channel separation
Tone control
Bass: ± 10 dB
Aigus: ± 10 dB
Noise level: none
High-resolution filter: no
Low-pass filter (subsonic): no
Mute: no
Special features
System bus
CD-Direct
Mono/stereo switch
Phase sensor
Nice bid, thank you.
Luxman A-311 in excellent condition, visually and sonically.
Some signs of use; see photos.
General
Manufacturer: Luxman
Model: A-311
Year of manufacture: 1992-1993
Made in Korea
Color: Gold, Black
Remote control: yes
Electric power consumption:
Dimensions : 438 x 125 x 363 mm (L x H x P).
Weight: 7.6 kg
Number of entries:
Phono (MM): 2.5 mV / 47 kΩ
CD : 150 mV/47 kOhm
DAT : 150 mV/47 kOhm
Band reading: 150 mV/47 kΩ
Auxiliary 1: 150 mV/47 kΩ
Phono / Aux 2: switchable
Number of outputs:
Tape recording:
Headphones:
2 pairs of speakers
System bus
Technical data
Continuous power (at the distortion factor)
8 ohms: 2 x 40 W RMS (0.1%)
8 ohms : 2 x 55 W DIN
4 ohms : 2 x 70 W DIN
Dynamic Power
8 ohms : 2 x 60 W
4 ohms : 2 x 85 W
2 ohms : 2 x 95 W
Total harmonic distortion: 0.01%
Attenuation factor:
Frequency response
Phono (RIAA): 20 Hz – 20 kHz, ±0.5 dB
CD, Tape, Aux: 10 Hz - 60 kHz, ±1 dB Signal-to-Noise Ratio:
Phono : 82 dB
CD, cassette, auxiliary: 97 dB
Stereo channel separation
Tone control
Bass: ± 10 dB
Aigus: ± 10 dB
Noise level: none
High-resolution filter: no
Low-pass filter (subsonic): no
Mute: no
Special features
System bus
CD-Direct
Mono/stereo switch
Phase sensor
Nice bid, thank you.
