No. 98654369

Sold
Pioneer - TX 9500 Tuner
Final bid
€ 265
11 weeks ago

Pioneer - TX 9500 Tuner

Pioneer TX9500 II Zeer mooie Tuner. Zowel optisch als muzikaal 100% Meer dan 20 jaar in bezit gehad, volledig nagekeken. Inside it's one of the most circuit-packed AM/FM tuners Pioneer have ever built. And outside it's one of the cleanest and most simple to use. The Pioneer TX-9500 has a new streamlined look, logically-arranged switches and controls, and a scientifically-designed tuning system that makes it all look so easy. But it's what's inside that counts: dual-gate MOS FETs and a 5-gang variable capacitor boost FM front end sensitivity to a superb 1.5uV (IHF). The FM IF has 7 ICs with differential amps, 4 ceramic filters (with 2 elements each) and a wide-band linear detector to pinpoint selectivity at 85dB or better and beef up the capture ratio to 1.0dB (IHF). Even in stereo the S/N is a super high 75dB, with total harmonic distortion of 0.2% at 1KHz. Thanks to the PLL MPX (phase lock loop multiplex) demodulator, stereo separation stretches to a wide 35dB over the 50 to 10,000Hz range. Stability? Even in signal-weak or signal-strong areas your station comes in clean and fresh. Planning to record off the air? Hit the switch for the built-in 440Hz test signal generator and check the output level against your deck's VUs for optimum adjustment before the music begins. Type: Mono/Stereo Tuner Tuning Bands: FM, MW Tuning Scale: Analogue Sensitivity: 1.5uV (FM), 300uV (MW) Signal to Noise Ratio: 75dB (FM), 50dB (MW) Distortion: 0.5% (FM) Selectivity: 85dB (FM), 40dB (MW) Frequency response: 20Hz to 15kHz (FM) Output: 650mV Semiconductors: 3 x FET, 11 x IC, 34 x transistors, 23 x diodes Dimensions: 420 x 150 x 365mm Weight: 9.1kg

No. 98654369

Sold
Pioneer - TX 9500 Tuner

Pioneer - TX 9500 Tuner

Pioneer TX9500 II

Zeer mooie Tuner. Zowel optisch als muzikaal 100%
Meer dan 20 jaar in bezit gehad, volledig nagekeken.

Inside it's one of the most circuit-packed AM/FM tuners Pioneer have ever built. And outside it's one of the cleanest and most simple to use.

The Pioneer TX-9500 has a new streamlined look, logically-arranged switches and controls, and a scientifically-designed tuning system that makes it all look so easy.

But it's what's inside that counts: dual-gate MOS FETs and a 5-gang variable capacitor boost FM front end sensitivity to a superb 1.5uV (IHF). The FM IF has 7 ICs with differential amps, 4 ceramic filters (with 2 elements each) and a wide-band linear detector to pinpoint selectivity at 85dB or better and beef up the capture ratio to 1.0dB (IHF). Even in stereo the S/N is a super high 75dB, with total harmonic distortion of 0.2% at 1KHz.

Thanks to the PLL MPX (phase lock loop multiplex) demodulator, stereo separation stretches to a wide 35dB over the 50 to 10,000Hz range. Stability? Even in signal-weak or signal-strong areas your station comes in clean and fresh.

Planning to record off the air? Hit the switch for the built-in 440Hz test signal generator and check the output level against your deck's VUs for optimum adjustment before the music begins.


Type: Mono/Stereo Tuner
Tuning Bands: FM, MW
Tuning Scale: Analogue
Sensitivity: 1.5uV (FM), 300uV (MW)
Signal to Noise Ratio: 75dB (FM), 50dB (MW)
Distortion: 0.5% (FM)
Selectivity: 85dB (FM), 40dB (MW)
Frequency response: 20Hz to 15kHz (FM)
Output: 650mV
Semiconductors: 3 x FET, 11 x IC, 34 x transistors, 23 x diodes
Dimensions: 420 x 150 x 365mm
Weight: 9.1kg

Final bid
€ 265
Ariel Cabello
Expert
Estimate  € 300 - € 350

Similar objects

For you in

Audio Equipment

Set a search alert
Set a search alert to get notified when new matches are available.

This object was featured in

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

How to buy on Catawiki

Learn more about our Buyer Protection

      1. Discover something special

      Browse through thousands of special objects selected by experts. View the photos, details and estimated value of each special object. 

      2. Place the top bid

      Find something you love and place the top bid. You can follow the auction to the end or let our system do the bidding for you. All you have to do is set a bid for the maximum amount you want to pay. 

      3. Make a secure payment

      Pay for your special object and we’ll keep your payment secure until it arrives safe and sound. We use a trusted payment system to handle all transactions. 

Have something similar to sell?

Whether you're new to online auctions or sell professionally, we can help you earn more for your special objects.

Sell your object