Iconic manual good working Beogram. RPMs are correct. Including original good sounding MM stylus. There is a RIAA pre/amp build in originally. So you can connect it to any amplifier via aux or tape. An adapter cable to RCA included. Some signs of use, also on the dustcover. Carefully shipped Beogram 1000 was the very first Bang & Olufsen turntable to be designated with the suffix 'Beogram'. Before its introduction, earlier decks did not, strictly speaking, hold this product name. This player has extremely low vibration and rumble - a decisive feature for playback of stereo gramophone records, due to the fact that the stylus must be sensitive to vibrations in all directions. The Beogram 1000 has antimicrophonic suspension that takes up acoustic and mechanical vibrations from the support and prevents the stylus from leaving the groove. In practice, this means that mechanical vibrations from the support or from persons walking or dancing in front of the Beogram 1000 cannot make the stylus jump in the groove. Such vibrations will be absorbed in the antimicrophonic suspension and will not reach the turntable or the pickup. Equipped with the world-famous B&O SP6-7 pickup unit; heavy turntable designed as a stroboscope disc; built-in hydraulically damped pickup lift operating y means of a rocker button. Specially engineered speed selector (78, 45 and 33.3 rpm); built-in special centre insert for 45 rpm records. The Beogram 1000 is available in two versions: Beogram 1000V (for 240/110 volts AC) and Beogram 1000VF (for 240/110 volts AC with built-in preamplifier. Voltage: 110 - 220 V AC Power consumption 10 W Speeds: 45 and 33 rpm Rumble Better than 55 dB (DIN B) Wow and flutter +/- 0.15 % peak value Pickup arm: ST/L 15° Cueing device: built-in Pickup SP 14A Recommended tracking force 1.5 - 2.5 kg Specifications: Dimensions W x H x D: 35.8 x 13.5cm x 30.8cm RIAA amplifier, built-in, can be deleted on request. Carefully insured shipped!!