Bang & Olufsen - Beomaster 3000 Type 2931 Solid state stereo amplifier

The Beomaster 3000 was a central component of the Beosystem 3000. It was an FM and AM receiver with four preset FM stations and an output power of 30 watts. The Beomaster 3000 featured automatic power management control, which protected the amplifier and speakers from overload.

The electronic volume control provided a smooth transition between higher and lower sound levels, and the volume could be set permanently. By activating the 'mute' function, the sound could be silenced without turning it off. Pressing it again would resume operation from where it was stopped.

Adding the Beocord 2000, Beogram 3000, and possibly Beogram CDX to the set resulted in a stylish and high-performance configuration. This receiver could be considered a natural successor to the Beomaster 2400-2.

Product details

Type number: 2932, 2931, 2937, 2935, 2933, 2939

Publication years: 1985, 1986, 1987.

Designer: Jacob Jensen

Color / Finish: Metallic gray

Product Specification

RMS DIN/IEC output power: 2 x 30 W / 8 ohms

Harmonic distortions DIN/IEC: < 0.08 %

Output power 20 – 20,000 Hz IHF: 2 x 25 W / 8 ohm

Harmonic distortions IHF: 1.6 dB / 8 ohm

Intermodulation IHF: < 0.1%

Frequency response 20 – 20,000 Hz: +/- 1.5 dB

FM range: 87.5 – 108 MHz
AM Tuner

Range LW 2932 – 2935 – 2937: 150 – 350 kHz

MW Range 2932 – 2935 – 2937: 520 – 1610 kHz

Power supply

2932 – 2935: 240 V

2939: 220 V

2931 – 2939: 220 V

Model 2933: 120 V

Energy consumption: 20-170 W
Dimensions (L x W x H): 62 x 7 x 25 cm
Weight: 7 kg

Built-in RIAA amplifier

Connectors

Phono DIN

Tape 1: DIN

Tape 2: RCA plugs

Speakers: 2 sets.

Headphones: max 12 V / 220 ohm