Very good sounding high class Pioneer; With direct input. Phono input with MM or MC Full aluminum face plate. Dimensions (WHD) 420 x 126 x 348 mm / 16.5 x 5 x 13.7 inch Notes A stereo hi-fi integrated amplifier with output power of 60 watts RMS (70 watts DIN) per channel into 8 ohms or 80 watts RMS (100 watts DIN) per channel into 4 ohms, housed in a black or silver metal case (referred to as the A-443-S model in the Service Manual only). Push button switches for Speakers A and B, Subsonic, Loudness, Direct, Muting and Phono Selector (MM/MC), rotary Bass and Treble tone controls, rotary switches for Rec Selector (Tape 2→1, Tape 1→2, Source, Off, CD, Tuner) and Input Selector (Tape2, DAT/Tape1, CD, Phono, Tuner and Line) and a jack for Phones. On the back, RCA phono input sockets for Phono, Line, Tuner and CD, input/output sockets for DAT/Tape1 and Tape2, input/output sockets for connection to an equalizer (after removal of two shorting bars), terminals for two pairs of Loudspeakers (A, B) and on the Canadian and general export models, 3 AC outlets. Specification Continuous power output (both channels driven at 20Hz-20kHz) 60W + 60W (T.H.D. 0.008%, 8Ω) 80W + 80W (T.H.D. 0.02%, 4Ω) DIN Continuous power output (both channels driven at 1kHz) 70W + 70W (T.H.D. 1.0%, 8Ω) 100W + 100W (T.H.D. 1.0%, 4Ω) Dynamic power output (8Ω/4Ω/2Ω) (on EIA dynamic test signal) 75+75W/110+110W/150+150W Total harmonic distortion 20Hz-20kHz, 60W, 8Ω 20Hz-20kHz, 80W, 4Ω 0.008% 0.02% Input sensitivity/impedance PHONO (MM) PHONO (MC) CD, TUNER, LINE, TAPE 2.5mV/50kΩ 0.2mV/100Ω 150mV/40kΩ Output level/impedance TAPE REC, ADAPTOR OUT 150mV/2.2kΩ Frequency response PHONO (MM) PHONO (MC) CD, TUNER, LINE, TAPE 20Hz-20kHz ±0.3dB 20Hz-20kHz ±0.5dB 5Hz-100kHz +0dB,-3dB Filter (SUBSONIC) 17Hz (12dB/oct.) Signal-to-Noise ratio (IHF short circuit, A network) PHONO (MM, 5mV input/MC, 0.5mV input) CD, TUNER, LINE, TAPE 93dB/74dB 107dB Picture are part of the description Carefully shipping