Nr. 105427939

Verkauft
Osaka Tin Toy Institute (OTTI) - Star Wars / Boba Fett - Blechspielzeug mit Aufziehwerk - 1990-1999 - Japan
Höchstgebot
€ 200
Vor 2 Tagen

Osaka Tin Toy Institute (OTTI) - Star Wars / Boba Fett - Blechspielzeug mit Aufziehwerk - 1990-1999 - Japan

[Master Piece, C 9.7/10 ] Osaka Tin Toy Institute (OTTI) Star Wars Boba Fett Wind-up Bipedal Tin Toy (unused, complete with original box) in working condition, made in Japan Please be sure to read and understand the following before purchasing. This is the Osaka Tin Toy Institute (OTTI) Star Wars Boba Fett Wind-up Bipedal Tin Toy is one of the most desirable modern Japanese tin toys. Although produced in the late 1990s (around 1997) rather than during the original Star Wars era, it was manufactured in relatively small numbers and is highly sought after by both Star Wars and Japanese tin toy collectors. It stands about 9.8 inches (25 cm) tall and walks using a wind-up mechanism(bipedal). Item is unused, complete, working and boxed, which significantly increases its value. The inclusion of the sealed blaster, original winding key, collector ID card, postcard, and instruction booklet significantly strengthens this example. Many surviving Osaka Tin Toy Institute Boba Fett toys are missing at least one of these accessories, so your set belongs in the upper tier of examples likely to appear at auction. Even he has his own blaster, Boba Fett can't fire, sorry. The inclusion of the sealed blaster, original winding key, collector ID card, postcard, and instruction booklet significantly strengthens this example. Many surviving Osaka Tin Toy Institute Boba Fett toys are missing at least one of these accessories, so this set belongs in the upper tier of examples likely to appear at auction. Don't miss this opportunity! Condition Evaluation; Toy Bright lithography Original blaster Strong wind-up action No paint wear Excellent gloss on the helmet and chest. Cape appears crisp with no fraying or fading. No visible scratches or paint loss. Figure still secured in the inner display tray. Original blaster is still sealed in its plastic bag. Original winding key is present. Collector's card, postcard and paperwork are included. This is essentially a complete collector set. Box Original inserts Sharp corners Minor shelf wear only minor corner rubbing, One or two tiny edge compressions, No water damage, No fading, Very clean printing. For a late-1990s collector's box, this is excellent. Toy condition: C 9.8/10 Accessories condition: C 10/10 Box condition: C 9.3/10 Overall grade: Near Mint–Mint: C 9.7/10 This is the type of example that serious Star Wars and Japanese tin toy collectors actively seek. Dimensions Approx. Toy/Box L6/7xW11/13xH25/27 cm Weight: Approximately Toy/Box 445/200 gr 1. Please check the condition of the item in the photos and consider bidding only if you are satisfied with the condition. If you have any doubts, any concerns or if it is difficult to judge based on the photos alone, if you overly particular please refrain from bidding. Please be sure to read and understand all information before purchasing.Please judge the condition of the item from the images. No claims or returns will be accepted due to the condition of the item. 2. These items have been stored as part of a collection for many years. While there may be some minor scratches or stains, item have been carefully stored and show little signs of use. As this is a vintage item, the item is generally marked as "Scratches and dirt”. You can see all visible scratches and stains in the photos. However, there may be some minor scratches that we have overlooked, scratches that are not visible in the photos, or parts that have been replaced or repaired by a previous owner. 3. All customs formalities and payments are under buyer responsibility after arrival to bidder's country. Any other costs or charges such as customs or import duties, customs clearance and handling may also apply during the shipment of your lot and will be charged to you by the involved party. By placing bid, you(bidder) confirm that you understood and accepted all the terms. Invoice will be attached on the package. Item will be shipped from JAPAN!!! So, you have to pay VAT and customs formalities... Since you have pay customs fee, I decreased my profit plan to make a balance for your budget. Happy biddings!

Nr. 105427939

Verkauft
Osaka Tin Toy Institute (OTTI) - Star Wars / Boba Fett - Blechspielzeug mit Aufziehwerk - 1990-1999 - Japan

Osaka Tin Toy Institute (OTTI) - Star Wars / Boba Fett - Blechspielzeug mit Aufziehwerk - 1990-1999 - Japan

[Master Piece, C 9.7/10 ] Osaka Tin Toy Institute (OTTI) Star Wars Boba Fett Wind-up Bipedal Tin Toy (unused, complete with original box) in working condition, made in Japan

Please be sure to read and understand the following before purchasing.
This is the Osaka Tin Toy Institute (OTTI) Star Wars Boba Fett Wind-up Bipedal Tin Toy is one of the most desirable modern Japanese tin toys. Although produced in the late 1990s (around 1997) rather than during the original Star Wars era, it was manufactured in relatively small numbers and is highly sought after by both Star Wars and Japanese tin toy collectors. It stands about 9.8 inches (25 cm) tall and walks using a wind-up mechanism(bipedal).

Item is unused, complete, working and boxed, which significantly increases its value. The inclusion of the sealed blaster, original winding key, collector ID card, postcard, and instruction booklet significantly strengthens this example. Many surviving Osaka Tin Toy Institute Boba Fett toys are missing at least one of these accessories, so your set belongs in the upper tier of examples likely to appear at auction. Even he has his own blaster, Boba Fett can't fire, sorry.

The inclusion of the sealed blaster, original winding key, collector ID card, postcard, and instruction booklet significantly strengthens this example. Many surviving Osaka Tin Toy Institute Boba Fett toys are missing at least one of these accessories, so this set belongs in the upper tier of examples likely to appear at auction.
Don't miss this opportunity!

Condition Evaluation;

Toy
Bright lithography
Original blaster
Strong wind-up action
No paint wear
Excellent gloss on the helmet and chest.
Cape appears crisp with no fraying or fading.
No visible scratches or paint loss.
Figure still secured in the inner display tray.
Original blaster is still sealed in its plastic bag.
Original winding key is present.
Collector's card, postcard and paperwork are included.

This is essentially a complete collector set.

Box
Original inserts
Sharp corners
Minor shelf wear only minor corner rubbing,
One or two tiny edge compressions,
No water damage,
No fading,
Very clean printing.

For a late-1990s collector's box, this is excellent.

Toy condition: C 9.8/10
Accessories condition: C 10/10
Box condition: C 9.3/10

Overall grade:
Near Mint–Mint: C 9.7/10
This is the type of example that serious Star Wars and Japanese tin toy collectors actively seek.

Dimensions Approx. Toy/Box L6/7xW11/13xH25/27 cm
Weight: Approximately Toy/Box 445/200 gr

1. Please check the condition of the item in the photos and consider bidding only if you are satisfied with the condition. If you have any doubts, any concerns or if it is difficult to judge based on the photos alone, if you overly particular please refrain from bidding. Please be sure to read and understand all information before purchasing.Please judge the condition of the item from the images. No claims or returns will be accepted due to the condition of the item.

2. These items have been stored as part of a collection for many years. While there may be some minor scratches or stains, item have been carefully stored and show little signs of use. As this is a vintage item, the item is generally marked as "Scratches and dirt”. You can see all visible scratches and stains in the photos. However, there may be some minor scratches that we have overlooked, scratches that are not visible in the photos, or parts that have been replaced or repaired by a previous owner.

3. All customs formalities and payments are under buyer responsibility after arrival to bidder's country. Any other costs or charges such as customs or import duties, customs clearance and handling may also apply during the shipment of your lot and will be charged to you by the involved party. By placing bid, you(bidder) confirm that you understood and accepted all the terms. Invoice will be attached on the package. Item will be shipped from JAPAN!!! So, you have to pay VAT and customs formalities... Since you have pay customs fee, I decreased my profit plan to make a balance for your budget.

Happy biddings!

Höchstgebot
€ 200
Sean Devitt
Experte
Schätzung  € 350 - € 400

Ähnliche Objekte

Für Sie aus der Kategorie

Spielzeug

Suchalarm einrichten
Richten Sie einen Suchalarm ein, um benachrichtigt zu werden, sobald neue passende Objekte verfügbar sind.

Dieses Objekt wurde vorgestellt in:

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

So kaufen Sie auf Catawiki

Mehr zum Käuferschutz erfahren

      1. Etwas Besonderes entdecken

      Entdecken Sie in unseren Auktionen Tausende von besonderen Objekten, die von Experten ausgewählt wurden. Sehen Sie sich die Fotos, die ausführliche Beschreibung und den Schätzwert der besonderen Objekte an, die Sie interessieren. 

      2. Höchstgebot abgeben

      Finden Sie etwas, das Sie begeistert, und geben Sie das Höchstgebot ab. Sie können die Auktion bis zum Schluss mitverfolgen oder unser System für Sie bieten lassen. Dazu müssen Sie einfach nur den Maximalbetrag eingeben, den Sie für das jeweilige Objekt ausgeben möchten. 

      3. Sichere Zahlung durchführen

      Bezahlen Sie Ihr besonderes Objekt und wir verwahren Ihre Zahlung, bis Ihr Objekt unversehrt bei Ihnen angekommen ist. Wir wickeln alle Transaktionen mit einem zuverlässigen und sicheren Zahlungssystem ab. 

Haben Sie etwas Ähnliches zu verkaufen?

Unabhängig davon, ob Online-Auktionen Neuland für Sie sind oder ob Sie gewerblich verkaufen – wir helfen Ihnen, mehr mit Ihren besonderen Objekten zu verdienen.

Objekt verkaufen