Audiophile vintage Akai AM-2400 integrated stereo amplifier in the silver finish (1979 - 1980). The Akai AM-2400 amplifier delivers 50 watts per channel ( 4 ohm) and features include a phono input, switchable tone control. From the Golden Era of Japaneses Audio. This superb very solidly built little amp will surprise with its performance. An amp that puches well above its weight It is in excellent condition and sounds super. General Manufacturer: Akai Model: AM-2400 Type: Integrated amplifier Years of manufacture: 1977 - 1979 Made in: Japan Color: Silver or black Dimensions (W/H/D): 440 x 141 x 331 mm Weight: 9.1 kg Original price approx.: 648 DM Connections Inputs: Phono MM: 3 mV / 47 kOhm Tuner: 150mV / 100kOhm AUX: 150mV / 100kOhm Tape Play 1, 2: 150mV / 100kOhm Tape Play DIN: 150mV / 100kOhm Outputs: Tape Rec 1, 2: 150mV / 100kOhm Tape Rec DIN: 30mV / 180kOhm Headphones: 2 pairs of speakers Technical Data Continuous power (at distortion factor) 8 Ohm: 2x 40 W (20Hz - 20Khz) 4 Ohm: 2x 50 W Frequency response: Phono MM: 30 Hz - 15 kHz (± 0.5 dB). High Level: 7 Hz - 70 kHz (+ 0 dB / - 1 dB) Distortion factor: < 0.15 % Dämpfungsfaktor: 60 bei 8 Ohm Signalrauschabstand: Phono MM: 75 dB High Level: 95 dB Kanaltrennung Phono: >55 dB Tone control: Bass: ± 10 dB at Tipping frequency 200 Hz, 400 Hz Tweeter: ± 10 dB at 10 kHz Cut-off frequency 6 kHz, 10 kHz Loudness: + 10 dB at 100 Hz, + 6 dB at 6 kHz High Filter: - 6 dB at 10 kHz Bass Filter: - 6 dB at 60 Hz Muting: 0 dB, - 20 dB Special Features Tilt frequencies for bass and tweeter Carefully shipped Pictures are part of the description signs of use on the edges. Original manual