Harman Kardon - TU 970 Tuner

Good and nice tuner. The TU 970 automatically scans the DAB band for available local digital radio stations. The available stations can be rearranged in the order desired by the user. A blue, two-line DOT matrix display shows messages and status indicators to simplify operating the tuner.

Furthermore, the Harman Kardon TU 970 is also equipped with an FM and MG tuner, with 30 presets per band, manual tuning, automatic tuning or presets. The TU 970 can be connected to almost any (pre-)amplifier via one of the coaxial or optical digital outputs, or via the conventional analog stereo output.

The TU 970 from Harman Kardon comes with an extensive remote control. The infrared input on the rear panel also allows control of the tuner via a suitable Harman Kardon system remote control, or via an appropriate IR-based automation system.

Technical Data
FM Section
Tuning range: 87.5 – 108.0 MHz (50 kHz steps)
Signal-to-noise ratio: 65 dB (mono) 60 dB (stereo)
Presets: 30

MG Section
Tuning range: 522 – 1620 kHz (9 kHz steps)
Signal-to-noise ratio: 35 dB
Presets: 30

DAB Section
RF Section
Band III, 174 – 240 MHz
Input: 50 ohm, nominal
Max signal: -3 dBm typical
Sensitivity: -96 dBm typical
Selectivity: 35 dB typical
Display: 2 lines, 16 characters DOT Matrix
Presets: 10
Audio Output: Stereo, 2.5 Vpp, 48 kHz sample rate, 16-bit resolution
Optical S/PDIF IEC 60958 Compliant, 48 kHz sample rate, 24-bit resolution

General
Mains voltage: 230 – 240 V AC, 50 Hz
Power consumption: 9 W; 3 W in standby
Dimensions: Width 442 mm, Height 63 mm, Depth 299 mm
Weight: 3.4 kg

Note: Orders to islands or special destinations take longer and have higher shipping costs, for example; Canary Islands