RCF - MZ8060 DSP - digital sound processor

Features

- 40-bit floating-point DSP and 48 kHz/24-bit analog-to-digital conversion with high quality, dynamic range > 112 dB.
- 8 universal inputs with 48V Phantom power and full audio processing, 6 high‑level assignable balanced outputs with full audio processing.
- 10 programmable logical inputs (GPI), 6 programmable logical outputs (GPO), 2 of which are relay.
- Parametric EQ, gate, compressors, limiters, delay, priority levels, auto-gain control, levels, gain on inputs, outputs and crossover points, auto-mix operations and configurable filters.
- Each unit can operate as a device for managing two environments with auto-mixing functionality for each.
- Configurable ALC circuit (automatic level control), available when using input 8 to connect a microphone for noise detection. The control can then be assigned to any output or group of outputs.
- USB connectivity for device configuration
- RDNet Networked Control

MZ 8060 is an extremely versatile digital audio matrix built on a powerful DSP platform, suitable for fixed installations and commercial audio applications. It offers a matrix 8x6, where 8 universal inputs MICROPHONE-LEVEL and 6 outputs can be processed through a full set of audio parameters, such as equalizers, compressors, gates, limiters, delays, priority and auto-mixing algorithms. Automatic volume control functionality is also available: a microphone can be used for this purpose on input 8 to automatically adjust volume according to ambient noise. MZ 8060 is equipped with 10 programmable logic inputs (GPI) and 6 programmable logic outputs (GPO), 2 of which are relays. The serial control port is configured for remote control from third‑party systems (e.g., Crestron and AMX). It is also possible to connect two MZ 8060 units to create a 16×12 matrix. A rear panel slot allows RDNet module integration into the mixer to provide an additional control system via RDNet network devices. The RJ-45 connector allows cascading up to 12 BM 3003 microphone bases, as an alternative to input 1. On the front panel are LEDs for monitoring input and output activity. The control software, integrated in the RDNet environment, enables configuration and control of the unit, connectable via optional RDNet module or through the front USB port. Suitable for 19’’ rack installation (1U). MZ 8060 uses a 50W power supply, 100-240VAC, 50/60Hz.