Saramonic - SR-PAX1 Microphone preamplifier

SARAMONIC Video pre-amp SR-PAX1

DSLR Preamp, Audio Mixer, Saramonic PAX1 2-Channel Microphone Adapter with Phantom Power, Dual XLR, 6.3mm and 3.5mm Inputs + 3.5mm Output for Canon, Nikon, Sony, DSLR Cameras, Pentax

The Saramonic SR-PAX1 is a dual channel audio mixer with phantom power specially designed for mirrorless digital camera, DSLR camera and camcorder with microphone jack. It's ideal for recording professional-quality audio from two sources and mixing it into your camera.

With two sets of inputs, the SR-PAX1 accepts signals from a wide range of microphone or line-level sources, such as balanced XLR microphones, wireless microphones, guitars or musical instruments with a 6.35mm connector. The 3.5mm inputs are also ideal for connecting audio devices with a 3.5mm output such as a smartphone or an MP3 player. The input levels of each channel can be easily controlled with the dual control buttons. A phone jack allows you to check the audio in real time. The SR-PAX1 makes your recording work much easier.

• Saramonic SR-PAX1 is a phantom powered dual channel audio mixer for mirrorless digital camera, DSLR camera and microphone jack camcorder
• The input levels of each channel can be easily controlled with the dual control buttons
• Ideal for recording professional-quality audio from two sources and mixing it into your camera
• A phone jack allows you to check the audio in real time

Key Features
Two mono 1/8″ (3.5 mm) mini-Jack inputs
Two balanced XLR inputs.
Two 1/4″ (6.35mm) mono standard inputs
Stereo 1/8″ (3.5 mm) mini-Jack input
One Stereo 1/8″ (3.5 mm) output jack
Mono/Stereo switch (M/S)
Dual Trim Control Knobs adjust the signal of each channel to the optimum recording levels
LINE /MIC /PH switch
5mm Headphone Output for Monitoring
1/4” Female Screw Hole
Specifications
Input XLR & 6.3mm jack x 2
1 /8″ (3.5 mm) jack x 3
Output 1/8″ (3.5 mm) jack x 1
Phone 1/8″ (3.5 mm) jack x 1
Frequency Response 20 Hz to 20 Khz, +/-1 dB
THD Less than 0.01% @ 1 kHz, -30 dBu input
SNR 74dBu @ 1 kHz, -30 dBu input
L & R Gain LINE: -30dBuMIC: 0dBu
MIC/PH: 0dBu
Phantom Power
For XLR jacks 48V power supplies
For 1/8″ (3.5 mm) jacks 5V power supplies
Power Indicator
Power on LED indicator in blue
Low battery LED indicator in red
Power Requirements 9 V alkaline or lithium battery (Not included)
Weight 357g
Dimensions (L×W×H) 101.2mm × 85.0mm ×65.5mm

PLEASE NOTE - Sale does not include camera or mic