RCF - MZ8060 DSP - digital sound processor

Features

- 40-bit floating-point DSP and 48 kHz/24-bit analog-to-digital conversion with high quality, dynamic range > 112 dB.
- 8 universal inputs with 48V phantom power and full audio processing, 6 high-level assignable balanced outputs with full audio processing.
- 10 programmable logical inputs (GPI), 6 programmable logical outputs (GPO), 2 of which are relay-controlled.
- Parametric EQ, gate, compressors, limiters, delay, priority levels, automatic gain control, levels, input/output and crosspoint gain, auto-mix operations and configurable filters.
- Each unit can operate as a device for managing two environments with auto-mixing functionality for each.
- Configurable ALC (Automatic Level Control) circuit, available by using input 8 to connect a microphone for noise detection. The control can then be assigned to any output or group of outputs.
- USB connectivity for device configuration
- RDNet Networked Control

MZ 8060 is an extremely versatile digital audio matrix based on a powerful DSP platform, suitable for fixed installations and commercial audio applications. It offers a matrix with 8x6, where 8 universal INPUTS MICROPHONE-LEVEL and 6 outputs can be processed through a complete set of audio parameters, such as equalizers, compressors, gates, limiters, delays, priorities and auto-mixing algorithms. Automatic volume control is also available: a microphone can be used for this purpose on input 8 to automatically adjust volume according to ambient noise. MZ 8060 is equipped with 10 programmable logical inputs (GPI) and 6 programmable logical outputs (GPO), 2 of which are relay-controlled. The serial control port is configured for remote control by third-party systems (e.g., Crestron and AMX). It is also possible to connect two MZ 8060 units to create a 16-input, 12-output matrix. One slot on the rear panel allows integration of an RDNet module into the mixer for an additional control system via RDNet network devices. The RJ-45 connector allows cascading up to 12 BM 3003 microphone bases, alternatively to input 1. On the front panel are LEDs for monitoring input and output activity. The control software, integrated in the RDNet environment, enables configuration and control of the unit, which can be connected via an optional RDNet module or via the front USB port. Suitable for 19