ESU N, H0, 0 - 50094 - Digital control unit (1) - ECoSDetector Feedback Module





€4 | ||
|---|---|---|
€3 |
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145304 reviews
Rated Excellent on Trustpilot.
The ECoSDetector is a digital feedback module with 16 inputs, four of which support RailCom.
Description from the seller
ECoSDetector Feedback Module, 16 digital inputs of which 4 RailCom.
Current sensor
The ECoSDetector can monitor 16 track sections. The inputs can be switched individually between switch input (ground input) or current sensor via a jumper. The ECoSDetector can therefore be used universally on all rail systems and is therefore the first choice for all 2-wire controllers. Since the inputs, with a maximum of 3 A flowing through each, can be supplied in two current groups independently of each other, each ECoSDetector can cover a maximum of two booster circuits. Optocouplers ensure reliable detection.
Train number detection
In addition to conventional track occupancy detectors, the ECoSDetector can specially monitor four of the 16 track sections: with RailCom technology ("local detector") you can not only determine whether a train is running on these sections, but even identify exactly which train it is (train number detection). Of course, you need RailCom-compatible locomotive decoders for this.
Smart
Precisely knowing which train is on a section, in combination with the ECoS route module, leads to new features: The level-crossing barriers can, for example, automatically be lowered, or trains can search for a free track in the shunting yard. In this process, the switch inputs or track occupancy detectors are electronically "decoupled" to ensure reliable feedback, even with unreliable contact or heavily dirty rails.
ECoSlink connection
Each ECoSDetector is directly connected to the central via the ECoSlink bus. Suitable are all ECoS command stations and all Central Station Reloaded with ESU updates. The galvanic isolation of the bus system and the command station guarantees the highest operational safety and a safe transfer to the command station. All ECoS detectors are automatically recognized in the central and integrated into the operating sequence. The configuration of the devices is conveniently and easily done directly at the command station and can also be performed after installation.
Future built-in
The control software of every ECoSDetector can be updated and expanded with additional features if necessary: The required "update" is carried out completely automatically when needed by the control panel. Thus your ECoSDetector is always up-to-date with the latest technology.
Photos are part of the description
If defective within 1 month from the Netherlands, returnat no cost.
All packages are sent by registered mail and insured.
Seller's Story
ECoSDetector Feedback Module, 16 digital inputs of which 4 RailCom.
Current sensor
The ECoSDetector can monitor 16 track sections. The inputs can be switched individually between switch input (ground input) or current sensor via a jumper. The ECoSDetector can therefore be used universally on all rail systems and is therefore the first choice for all 2-wire controllers. Since the inputs, with a maximum of 3 A flowing through each, can be supplied in two current groups independently of each other, each ECoSDetector can cover a maximum of two booster circuits. Optocouplers ensure reliable detection.
Train number detection
In addition to conventional track occupancy detectors, the ECoSDetector can specially monitor four of the 16 track sections: with RailCom technology ("local detector") you can not only determine whether a train is running on these sections, but even identify exactly which train it is (train number detection). Of course, you need RailCom-compatible locomotive decoders for this.
Smart
Precisely knowing which train is on a section, in combination with the ECoS route module, leads to new features: The level-crossing barriers can, for example, automatically be lowered, or trains can search for a free track in the shunting yard. In this process, the switch inputs or track occupancy detectors are electronically "decoupled" to ensure reliable feedback, even with unreliable contact or heavily dirty rails.
ECoSlink connection
Each ECoSDetector is directly connected to the central via the ECoSlink bus. Suitable are all ECoS command stations and all Central Station Reloaded with ESU updates. The galvanic isolation of the bus system and the command station guarantees the highest operational safety and a safe transfer to the command station. All ECoS detectors are automatically recognized in the central and integrated into the operating sequence. The configuration of the devices is conveniently and easily done directly at the command station and can also be performed after installation.
Future built-in
The control software of every ECoSDetector can be updated and expanded with additional features if necessary: The required "update" is carried out completely automatically when needed by the control panel. Thus your ECoSDetector is always up-to-date with the latest technology.
Photos are part of the description
If defective within 1 month from the Netherlands, returnat no cost.
All packages are sent by registered mail and insured.

