Pioneer - SA-9500 Solid state integrated amplifier
04
days
22
hours
18
minutes
27
seconds
 | €15 |
|---|
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 143966 reviews
Rated Excellent on Trustpilot.
Description from the seller
Top-of-the-line Pioneer amplifier of its era. Everything works perfectly and has just been repaired. Some parts, such as capacitors and transistors on the preamplifier board, were replaced. The technical condition is excellent.
Aesthetically, it has some marks, as can be seen in the photos, due to age.
It combines an enormous stereo output power with a delicacy of transparency; a combination rarely found nowadays where one seeks a lot of power at any price.
The Pioneer SA-9500 offers an unusually high continuous output power of 80 watts per channel, RMS minimum at 8 ohms, from 20 Hz to 20,000 Hz, with total harmonic distortion not exceeding 0.1%, but it also guarantees that, even when used at low volumes, the performance retains a crisp and bright clarity.
Dynamic response and reliability of the SA-9500 are matched by a flexibility of use rarely found in this price range. For example, the versatility of the tone control: both the bass and treble sections have three-position selections and an on/off switch for a "flat" response with the push of a button.
Two-stage filters (high and low), the practical tape duplication switching system, the selection of multiple input sources, two-system speaker switching, and much more ensure first-class handling.
Specifications:
Output power: 80 watts per channel at 8Ω (stereo)
Frequency response: 7 Hz to 40 kHz
Total harmonic distortion: 0.005%
Damping factor: 30
Input sensitivity: 6 mV (mic), 2.5 mV (MM), 150 mV (line)
Signal-to-noise ratio: 65 dB (mic), 70 dB (MM), 90 dB (line)
Output: 150 mV (line), 2 V (preamplifier output)
Semiconductors: 2 x FET, 54 x transistors, 26 x diodes
Dimensions: 420 x 165 x 403 mm
Weight: 17.2 kg
See the photos. They are part of the description.
Shipped well packaged and protected worldwide.
Top-of-the-line Pioneer amplifier of its era. Everything works perfectly and has just been repaired. Some parts, such as capacitors and transistors on the preamplifier board, were replaced. The technical condition is excellent.
Aesthetically, it has some marks, as can be seen in the photos, due to age.
It combines an enormous stereo output power with a delicacy of transparency; a combination rarely found nowadays where one seeks a lot of power at any price.
The Pioneer SA-9500 offers an unusually high continuous output power of 80 watts per channel, RMS minimum at 8 ohms, from 20 Hz to 20,000 Hz, with total harmonic distortion not exceeding 0.1%, but it also guarantees that, even when used at low volumes, the performance retains a crisp and bright clarity.
Dynamic response and reliability of the SA-9500 are matched by a flexibility of use rarely found in this price range. For example, the versatility of the tone control: both the bass and treble sections have three-position selections and an on/off switch for a "flat" response with the push of a button.
Two-stage filters (high and low), the practical tape duplication switching system, the selection of multiple input sources, two-system speaker switching, and much more ensure first-class handling.
Specifications:
Output power: 80 watts per channel at 8Ω (stereo)
Frequency response: 7 Hz to 40 kHz
Total harmonic distortion: 0.005%
Damping factor: 30
Input sensitivity: 6 mV (mic), 2.5 mV (MM), 150 mV (line)
Signal-to-noise ratio: 65 dB (mic), 70 dB (MM), 90 dB (line)
Output: 150 mV (line), 2 V (preamplifier output)
Semiconductors: 2 x FET, 54 x transistors, 26 x diodes
Dimensions: 420 x 165 x 403 mm
Weight: 17.2 kg
See the photos. They are part of the description.
Shipped well packaged and protected worldwide.
Details
Era
1900-2000
Brand
Pioneer
Model
SA-9500
Multiple models
No
Physical condition
Good
Number of objects
1
Includes
Power cord
Weight
18 kg
Functional condition
Tested and working/playable
Sold by
