Bang & Olufsen - BeoMaster 2000 Vintage Solid state stereo receiver





€1 |
|---|
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145472 reviews
Rated Excellent on Trustpilot.
The Bang & Olufsen BeoMaster 2000 Vintage stereo receiver (Type 2911), made between 1983 and 1987, is in good condition and tested working.
Description from the seller
With the BeoMaster 2000, master designer Jacob Jensen delivered the beating heart of the beloved 'Beosystem 2000' in the 1980s. Jensen broke completely with the traditional image of a thick black box full of knobs and designed a wedge-shaped, low-profile unit of brushed aluminum that almost seems to hover on the sideboard. The result is a timeless Danish design piece that still looks modern and inviting decades later.
Operation is an experience in itself. All primary functions – such as choosing between a turntable, cassette deck, or one of the five FM preset stations – are controlled with a light touch on the slanted front panel, while volume is adjusted with a wide electronic tip-toe strip. Only when you lift the elongated aluminum lid at the top do the secondary sliders for bass, treble, balance, and manual radio tuning appear, so the device always makes a neat and uncluttered impression in daily use. Under the hood lies a surprisingly musical amplifier of 2 x 25 Watts continuous power with that typical warm and full B&O sound, provided with an excellent built-in phono preamplifier for a turntable and two free tape/aux inputs to which you can easily connect a modern streamer or phone using a short adapter cable.
Delivered as a receiver with a fixed power cord.
Condition:
Used vintage condition with visible signs of age and use on the housing and the aluminum panel. Technically fully checked and tested; the tip-toetsen respond well, the sliders under the lid operate without creaking, the display lighting is clear, and both amplifier channels play cleanly and in good balance.
Specifications:
Model: BeoMaster 2000 (Type 2911)
Designer: Jacob Jensen
Manufacturer: Bang & Olufsen (Struer, Denmark)
Year: 1983 – 1987
Construction: Brushed aluminum with charcoal/black front panel
Type: Stereo FM/AM receiver (tuner/amplifier)
Continuous power (RMS): 2 x 25 Watts at 8 Ohm
Music power: 2 x 50 Watts
Frequency range: 20 – 20,000 Hz (± 1.5 dB)
Tuner range: FM (with 5 programmable preset stations) and AM (LW/MW)
Tone control: Sliders for Bass, Treble and Balance under the aluminum lid, plus selectable Loudness
Inputs: 1 x Phono (7-pin DIN with built-in RIAA preamplifier), 2 x Tape/Aux (7-pin and 5-pin DIN with Datalink)
Outputs: 2 pairs of speaker outputs (2-pin DIN for Speaker 1 & Speaker 2) and a 6.3 mm headphone jack on the front
Power consumption: 20 – 130 Watts (standby 5 Watts)
Dimensions (W x H x D): 62.0 x 7.0 x 25.0 cm
Weight: approximately 7.0 kg
With the BeoMaster 2000, master designer Jacob Jensen delivered the beating heart of the beloved 'Beosystem 2000' in the 1980s. Jensen broke completely with the traditional image of a thick black box full of knobs and designed a wedge-shaped, low-profile unit of brushed aluminum that almost seems to hover on the sideboard. The result is a timeless Danish design piece that still looks modern and inviting decades later.
Operation is an experience in itself. All primary functions – such as choosing between a turntable, cassette deck, or one of the five FM preset stations – are controlled with a light touch on the slanted front panel, while volume is adjusted with a wide electronic tip-toe strip. Only when you lift the elongated aluminum lid at the top do the secondary sliders for bass, treble, balance, and manual radio tuning appear, so the device always makes a neat and uncluttered impression in daily use. Under the hood lies a surprisingly musical amplifier of 2 x 25 Watts continuous power with that typical warm and full B&O sound, provided with an excellent built-in phono preamplifier for a turntable and two free tape/aux inputs to which you can easily connect a modern streamer or phone using a short adapter cable.
Delivered as a receiver with a fixed power cord.
Condition:
Used vintage condition with visible signs of age and use on the housing and the aluminum panel. Technically fully checked and tested; the tip-toetsen respond well, the sliders under the lid operate without creaking, the display lighting is clear, and both amplifier channels play cleanly and in good balance.
Specifications:
Model: BeoMaster 2000 (Type 2911)
Designer: Jacob Jensen
Manufacturer: Bang & Olufsen (Struer, Denmark)
Year: 1983 – 1987
Construction: Brushed aluminum with charcoal/black front panel
Type: Stereo FM/AM receiver (tuner/amplifier)
Continuous power (RMS): 2 x 25 Watts at 8 Ohm
Music power: 2 x 50 Watts
Frequency range: 20 – 20,000 Hz (± 1.5 dB)
Tuner range: FM (with 5 programmable preset stations) and AM (LW/MW)
Tone control: Sliders for Bass, Treble and Balance under the aluminum lid, plus selectable Loudness
Inputs: 1 x Phono (7-pin DIN with built-in RIAA preamplifier), 2 x Tape/Aux (7-pin and 5-pin DIN with Datalink)
Outputs: 2 pairs of speaker outputs (2-pin DIN for Speaker 1 & Speaker 2) and a 6.3 mm headphone jack on the front
Power consumption: 20 – 130 Watts (standby 5 Watts)
Dimensions (W x H x D): 62.0 x 7.0 x 25.0 cm
Weight: approximately 7.0 kg

