Sansui - 2000A Solid state stereo receiver

Working perfectly. Looks very good. Signs of use consistent with its age.

General

Manufacturer: Sansui
Model: 2000 A
Type: Receiver
Years of manufacture: 1969 - 1971
Made in: Japan
Color: silver, housing walnut
Remote control: no
Power consumption:
Dimensions: 415 x 124 x 331 mm (WxHxD).
Weight: 12 kg
Original price approx.: 1'598 DM

Connections

Number of inputs:
Phono MM: 2.2 mV
Tape Head: 2,0 mV
Tape Play: 150 mV / 50 kOhm
Tape Play DIN: 150 mV / 50 kOhm
Aux: 150 mV / 50 kOhm

Antenna (FM: 75, 300 Ohm, AM).
Number of outputs:
Tape Rec: 200 mV
Tape Rec DIN: 35 mV

Headphones (6,3mm jack)
2 pairs of loudspeakers

Technical Data

Amplifier

Continuous power (at distortion):
8 Ohm: 2x 35 W
4 Ohm: 2x 43 W

dynamic power:
8 Ohm: 2x 45 W
4 Ohm: 2x 60 W
Total harmonic distortion: < 0.8
Attenuation factor: 24 (at 8 Ohm)
Frequency response:
Phono: 30 - 15,000 Hz, ± 0.2 dB
High Level: 20 - 40,000 Hz (+0 dB, -1 dB)
Signal-to-noise ratio:
Phono: 70 dB
High Level: 75 dB

Tone control:
Bass at 100 Hz: ± 10 dB
Treble at 10 kHz: ± 10 dB

Loudness: yes, +6 dB at 100 Hz, +3 dB at 10 kHz
Low Filter: yes, 6 dB / octave at 30 Hz
High Filter: yes, 6 dB / octave at 8 kHz
Mute: yes

Tuner

Reception: FM/MW
Frequencies:
FM: 88 - 108 MHz
MW: 535 - 1605 KHz
Input sensitivity:
FM: 1.8µV
MW: 15µV
Frequency response: 30 - 15,000 Hz (+0.2/-0.5 dB)
Distortion factor:
FM (1 kHz): < 0.10% (mono), < 0.15% (stereo).
Signal-to-noise ratio:
FM (65 dBf): 75 dB (mono), 66 dB (stereo).
MW: 55 dB
Channel separation: 35 dB (1 kHz)
selectivity: 50 dB
Co-wave selection: 2.7 dB
Spurious wave selection:
FM: 80 dB
Mirror frequency attenuation:
FM: 90 dB
MW: 40 dB IF attenuation:

FM: 110 dB
MW: 40 dB
AM suppression: 55 dB

Special Features

Mono / Stereo switch