Pioneer - A-401 Solid state integrated amplifier
05
days
16
hours
36
minutes
15
seconds
 | €4 | |
|---|---|---|
 | €2 |
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145217 reviews
Rated Excellent on Trustpilot.
This Pioneer A-401 integrated stereo amplifier, manufactured in 1992, is in good physical condition and has been tested and works.
AI-assisted summary
Description from the seller
A Pioneer amplifier in excellent condition.
An integrated hi-fi stereo amplifier with an output of 2 x 60 watts into 8 ohms (2 x 70 watts DIN into 8 ohms).
Featuring Pioneer's Super Linear Circuit and Clean Ground System.
Anti-resonance and vibration-resistant design with honeycomb chassis and heatsink.
Features Bass and Treble tone controls (with Active Tone Control), a rotary speaker selector (A, B, A + B), switches for Direct, Subsonic filter and Muting, plus a headphone jack.
On the rear panel: RCA phono sockets for PHONO, LINE and CD inputs; inputs/outputs for DAT/TAPE1, TAPE2 and ADAPTOR (I/O connected by removable links); and terminals for 2 pairs of speakers.
On the rear panel, one of the photos shows two small cables. These are replacements for the original U-shaped adapter pins. They should be fitted if you are not using the adapter connection.
The adapter connection can be used, for example, to connect an equalizer..
Continuous power output (both channels driven, 20Hz-20kHz)
THD 0.009%, into 8Ω - 60W + 60W
THD 0.02%, into 4Ω - 80W + 80W
DIN continuous power (both channels driven at 1kHz)
THD 1.0%, into 8Ω - 70W + 70W
THD 1.0%, into 4Ω -100W + 100W
Dynamic power output (with EIA dynamic test signal)
8Ω/4Ω/2Ω - 75W/110W/150W
Total harmonic distortion
20Hz—20kHz, 60W, 8Ω - 0.009%
20Hz—20kHz, 80W, 4Ω - 0.02%
Input sensitivity/impedance
PHONO (MM) - 2.5mV/50kΩ
CD, TUNER, LINE, TAPE - 150mV/40kΩ
Output level/impedance TAPE REC, ADAPTOR OUTPUT -150mV/1kΩ
Frequency response 20Hz—20kHz ±0.3dB
PHONO (MM), CD, TUNER, LINE, TAPE - 5Hz—100kHz +0dB,-3dB
Filter (SUBSONIC) 17Hz (12dB/oct.)
S/N ratio (IHF short-circuit, A-weighted)
PHONO (MM 5mV input) - 93dB
CD, TUNER, LINE, TAPE - 108dB
S/N ratio (DIN, continuous power/50mW)
PHONO (MM) - 74dB/63dB
CD, TUNER, LINE, TAPE - 88dB/65dB
2 x 70 Watt sine-wave output (8 Ohms) DIN,
2 x 100 Watt sine-wave output (4 Ohms) DIN.
Dimensions: 420 x 347 x 126mm
Weight: 8.1kg
Year: 1992
Unfortunately, the only manual I could find online was in German, and a copy of it is included.
A Pioneer amplifier in excellent condition.
An integrated hi-fi stereo amplifier with an output of 2 x 60 watts into 8 ohms (2 x 70 watts DIN into 8 ohms).
Featuring Pioneer's Super Linear Circuit and Clean Ground System.
Anti-resonance and vibration-resistant design with honeycomb chassis and heatsink.
Features Bass and Treble tone controls (with Active Tone Control), a rotary speaker selector (A, B, A + B), switches for Direct, Subsonic filter and Muting, plus a headphone jack.
On the rear panel: RCA phono sockets for PHONO, LINE and CD inputs; inputs/outputs for DAT/TAPE1, TAPE2 and ADAPTOR (I/O connected by removable links); and terminals for 2 pairs of speakers.
On the rear panel, one of the photos shows two small cables. These are replacements for the original U-shaped adapter pins. They should be fitted if you are not using the adapter connection.
The adapter connection can be used, for example, to connect an equalizer..
Continuous power output (both channels driven, 20Hz-20kHz)
THD 0.009%, into 8Ω - 60W + 60W
THD 0.02%, into 4Ω - 80W + 80W
DIN continuous power (both channels driven at 1kHz)
THD 1.0%, into 8Ω - 70W + 70W
THD 1.0%, into 4Ω -100W + 100W
Dynamic power output (with EIA dynamic test signal)
8Ω/4Ω/2Ω - 75W/110W/150W
Total harmonic distortion
20Hz—20kHz, 60W, 8Ω - 0.009%
20Hz—20kHz, 80W, 4Ω - 0.02%
Input sensitivity/impedance
PHONO (MM) - 2.5mV/50kΩ
CD, TUNER, LINE, TAPE - 150mV/40kΩ
Output level/impedance TAPE REC, ADAPTOR OUTPUT -150mV/1kΩ
Frequency response 20Hz—20kHz ±0.3dB
PHONO (MM), CD, TUNER, LINE, TAPE - 5Hz—100kHz +0dB,-3dB
Filter (SUBSONIC) 17Hz (12dB/oct.)
S/N ratio (IHF short-circuit, A-weighted)
PHONO (MM 5mV input) - 93dB
CD, TUNER, LINE, TAPE - 108dB
S/N ratio (DIN, continuous power/50mW)
PHONO (MM) - 74dB/63dB
CD, TUNER, LINE, TAPE - 88dB/65dB
2 x 70 Watt sine-wave output (8 Ohms) DIN,
2 x 100 Watt sine-wave output (4 Ohms) DIN.
Dimensions: 420 x 347 x 126mm
Weight: 8.1kg
Year: 1992
Unfortunately, the only manual I could find online was in German, and a copy of it is included.
Details
Era
1900-2000
Brand
Pioneer
Model
A-401
Multiple models
No
Physical condition
Good
Number of objects
1
Includes
+ Extra item (see description)
Serial number
MD9402806 AP
Year of manufacturing
1992
Weight
8.1 kg
Functional condition
Tested and working/playable
Height
12.6 cm
Width
42 cm
Depth
34.7 cm
Sold by
