DJI SDR Transmission Combo (TX + RX) Camera accessories






Over 35 years' experience specialising in cameras and optical equipment.
€150 | ||
|---|---|---|
€2 | ||
€1 |
Catawiki Buyer Protection
Your payment’s safe with us until you receive your object.View details
Trustpilot 4.4 | 145776 reviews
Rated Excellent on Trustpilot.
The DJI SDR Transmission Combo (TX + RX) is in very good physical condition, tested and working, and provides wireless 1080p60 monitoring.
Description from the seller
DJI SDR Transmission Combo: a transmitter and receiver for wireless 1080p60 monitoring on set. It's small and light, runs on standard USB-C power, and outputs to SDI, HDMI, or directly to a phone or tablet over USB-C.
Key features:
- 1080p60 at up to 20 Mbps, with 35 ms latency (excluding camera and monitor)
- Range up to 2 km (CE) / 3 km (FCC), with automatic frequency hopping across 2.4 GHz, 5.8 GHz and DFS bands
- SDI and HDMI inputs on the transmitter, SDI and HDMI outputs on the receiver; HDMI in to SDI out works
- USB-C monitoring: connect the receiver directly to a phone or tablet
- Broadcast mode supports an unlimited number of receivers, and Wi-Fi mode lets you monitor on phones without a receiver
- Metadata pass-through from ARRI and RED cameras via SDI
- Built-in talkback between transmitter and receiver
- Works with DJI RS 3 Pro, RS 4 and RS 4 Pro: powered from the gimbal, with Force Mobile and virtual joystick control
- Powered by any USB-C PD charger or power bank (9 V / 2 A); the receiver also takes NP-F batteries
- About 145 g per unit
Included:
- Transmitter (TX)
- Receiver (RX)
- USB-A to USB-C cable
- Camera mounting adapter plate
- Gimbal mounting adapter plate
Condition:
Tested and working. Cosmetic condition is as shown in the photos.
Ships from Ljubljana, Slovenia.
Sold as described, no returns. Please check the photos and description carefully before bidding, and send any questions before the auction closes.
DJI SDR Transmission Combo: a transmitter and receiver for wireless 1080p60 monitoring on set. It's small and light, runs on standard USB-C power, and outputs to SDI, HDMI, or directly to a phone or tablet over USB-C.
Key features:
- 1080p60 at up to 20 Mbps, with 35 ms latency (excluding camera and monitor)
- Range up to 2 km (CE) / 3 km (FCC), with automatic frequency hopping across 2.4 GHz, 5.8 GHz and DFS bands
- SDI and HDMI inputs on the transmitter, SDI and HDMI outputs on the receiver; HDMI in to SDI out works
- USB-C monitoring: connect the receiver directly to a phone or tablet
- Broadcast mode supports an unlimited number of receivers, and Wi-Fi mode lets you monitor on phones without a receiver
- Metadata pass-through from ARRI and RED cameras via SDI
- Built-in talkback between transmitter and receiver
- Works with DJI RS 3 Pro, RS 4 and RS 4 Pro: powered from the gimbal, with Force Mobile and virtual joystick control
- Powered by any USB-C PD charger or power bank (9 V / 2 A); the receiver also takes NP-F batteries
- About 145 g per unit
Included:
- Transmitter (TX)
- Receiver (RX)
- USB-A to USB-C cable
- Camera mounting adapter plate
- Gimbal mounting adapter plate
Condition:
Tested and working. Cosmetic condition is as shown in the photos.
Ships from Ljubljana, Slovenia.
Sold as described, no returns. Please check the photos and description carefully before bidding, and send any questions before the auction closes.
