Nr. 103051343

Verkauft
Pioneer - SA-7300 Integrierter Festkörper-Verstärker
Höchstgebot
€ 124
Vor 1 Woche

Pioneer - SA-7300 Integrierter Festkörper-Verstärker

Mint condition and perfectly working Pioneer SA-7300. Unit has been tested and fully functional. Hybrid IC circuitry employing dual positive and negative power supplies is incorporated in the power amplifier section of the SA-7300. All stages are directly coupled in the OCL circuit design to provide plenty of power at minimized distortion. Output is 35W + 35W in the range of 20Hz-20kHz at 8 ohms with both channels driven and 0.3% harmonic distortion. The equalizer amplifier also utilizes a dual positive and negative power supply and IC circuitry to assure RIAA deviation within +0.3dB, while a maximum input of up to 200mV (at 1 kHz) can be easily handled (at 0.1 % harmonic distortion). Both relay and electronic circuitry combine to safeguard valuable transistors and speakers in event of malfunction. This special protector circuit also performs a muting function to prevent annoying surge noise when the POWER switch is operated. Advanced CR type tone controls and 2-stage direct coupled amplifier provide highly effective control operation. Regardless of the tone control settings, a flat frequency response can always be obtained by employing the TONE switch. This is convenient for checking cartridge and speaker tone, and evaluating listening room characteristics. The recording and playback jacks of the SA-7300 are provided for two tape decks, in addition to separate Tape Monitor switches. Extremely convenient tape duplication and editing can be performed if two tape decks are available. The clean uncluttered front panel layout avoids a confusing array of unnecessary controls and switches. Modern serene styling is combined with one-glance operational ease. Specifications Power output: 35 watts per channel into 8Ω (stereo) Frequency response: 10Hz to 50kHz Total harmonic distortion: 0.3% Damping factor: 25 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MM), 90dB (line) Output: 150mV (line), 30mV (DIN) Semiconductors: 4 x IC, 20 x transistors, 16 x diodes Dimensions: 350 x 125 x 282mm All pictures are original of this lot and part of description so what you see is what you get !

Nr. 103051343

Verkauft
Pioneer - SA-7300 Integrierter Festkörper-Verstärker

Pioneer - SA-7300 Integrierter Festkörper-Verstärker

Mint condition and perfectly working Pioneer SA-7300.
Unit has been tested and fully functional.

Hybrid IC circuitry employing dual positive and negative power supplies is incorporated in the power amplifier section of the SA-7300. All stages are directly coupled in the OCL circuit design to provide plenty of power at minimized distortion. Output is 35W + 35W in the range of 20Hz-20kHz at 8 ohms with both channels driven and 0.3% harmonic distortion.

The equalizer amplifier also utilizes a dual positive and negative power supply and IC circuitry to assure RIAA deviation within +0.3dB, while a maximum input of up to 200mV (at 1 kHz) can be easily handled (at 0.1 % harmonic distortion).

Both relay and electronic circuitry combine to safeguard valuable transistors and speakers in event of malfunction. This special protector circuit also performs a muting function to prevent annoying surge noise when the POWER switch is operated.

Advanced CR type tone controls and 2-stage direct coupled amplifier provide highly effective control operation. Regardless of the tone control settings, a flat frequency response can always be obtained by employing the TONE switch. This is convenient for checking cartridge and speaker tone, and evaluating listening room characteristics.

The recording and playback jacks of the SA-7300 are provided for two tape decks, in addition to separate Tape Monitor switches. Extremely convenient tape duplication and editing can be performed if two tape decks are available.

The clean uncluttered front panel layout avoids a confusing array of unnecessary controls and switches. Modern serene styling is combined with one-glance operational ease.

Specifications
Power output: 35 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.3%

Damping factor: 25

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 70dB (MM), 90dB (line)

Output: 150mV (line), 30mV (DIN)

Semiconductors: 4 x IC, 20 x transistors, 16 x diodes

Dimensions: 350 x 125 x 282mm

All pictures are original of this lot and part of description so what you see is what you get !



Höchstgebot
€ 124
Matthew McIvor
Experte
Schätzung  € 180 - € 220

Ähnliche Objekte

Für Sie aus der Kategorie

Audio-Equipment

Suchalarm einrichten
Richten Sie einen Suchalarm ein, um benachrichtigt zu werden, sobald neue passende Objekte verfügbar sind.

Dieses Objekt wurde vorgestellt in:

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

So kaufen Sie auf Catawiki

Mehr zum Käuferschutz erfahren

      1. Etwas Besonderes entdecken

      Entdecken Sie in unseren Auktionen Tausende von besonderen Objekten, die von Experten ausgewählt wurden. Sehen Sie sich die Fotos, die ausführliche Beschreibung und den Schätzwert der besonderen Objekte an, die Sie interessieren. 

      2. Höchstgebot abgeben

      Finden Sie etwas, das Sie begeistert, und geben Sie das Höchstgebot ab. Sie können die Auktion bis zum Schluss mitverfolgen oder unser System für Sie bieten lassen. Dazu müssen Sie einfach nur den Maximalbetrag eingeben, den Sie für das jeweilige Objekt ausgeben möchten. 

      3. Sichere Zahlung durchführen

      Bezahlen Sie Ihr besonderes Objekt und wir verwahren Ihre Zahlung, bis Ihr Objekt unversehrt bei Ihnen angekommen ist. Wir wickeln alle Transaktionen mit einem zuverlässigen und sicheren Zahlungssystem ab. 

Haben Sie etwas Ähnliches zu verkaufen?

Unabhängig davon, ob Online-Auktionen Neuland für Sie sind oder ob Sie gewerblich verkaufen – wir helfen Ihnen, mehr mit Ihren besonderen Objekten zu verdienen.

Objekt verkaufen