Nr. 108228514

Verkauft
Ronson - Ohne mindestpreis - Feuerzeug - Verbundwerkstoff
Höchstgebot
€ 50
Ohne mindestpreis
Vor 1 Woche

Ronson - Ohne mindestpreis - Feuerzeug - Verbundwerkstoff

Ronson Petrol Penciliter Louis V Aronson - Art Metal Works inc, Newark, NJ, USA First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson. This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one. The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory. Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below. It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use. Specification Maker: Art Metal Works, Newark, New Jersey, makers of Ronson Model: Penciliter, first generation Period: circa 1934 to 1940 Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case Design: Louis V. Aronson Finish: plating, geometric engine turned body Lead: usually 1.1mm rather than the later 0.9mm Length: 15cm Lighter: petrol, clip-operated DES.Pat.92.996. Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

Nr. 108228514

Verkauft
Ronson - Ohne mindestpreis - Feuerzeug - Verbundwerkstoff

Ronson - Ohne mindestpreis - Feuerzeug - Verbundwerkstoff

Ronson Petrol Penciliter
Louis V Aronson - Art Metal Works inc, Newark, NJ, USA
First generation Ronson Penciliter by Art Metal Works, 1930s, Art Deco petrol lighter and propelling pencil, US, UK and Canadian patents

The Penciliter put a lighter and a propelling pencil in a single pocket piece. The clip works the lighter, and the cone twists to advance the lead. It was made in Newark, New Jersey by Art Metal Works, the firm behind the Ronson name, to patents taken out by its founder Louis V. Aronson.

This is a first generation example, produced from around 1934 until the outbreak of the war, when Ronson production turned to war work. The body carries the fine geometric engine turning of the Art Deco period, and the patent block near the top gives the United States, United Kingdom and Canadian numbers, which is the marking found on the early version rather than on the post-war one.

The patent dates of 1925 and 1926 refer to Aronson’s lighter mechanism, which Art Metal Works continued to mark for years after the grant. They establish the design and its protection rather than the year this example left the factory.

Condition is very good. The lighter sparks and has a wick though I have not fired it. The pencil advances cleanly or needs attention. The plating shows light wear consistent with pocket use, with brassing at the high points / clip. The patent imprint is clear and reproduced below.

It is sold unfuelled, since lighters must be posted empty. A fresh flint, a wick if needed and standard lighter fuel will return it to use.

Specification

Maker: Art Metal Works, Newark, New Jersey, makers of Ronson
Model: Penciliter, first generation
Period: circa 1934 to 1940
Patents: United States, United Kingdom and Canada, dated 1925 and 1926, marked at the top of the case
Design: Louis V. Aronson
Finish: plating, geometric engine turned body
Lead: usually 1.1mm rather than the later 0.9mm
Length: 15cm
Lighter: petrol, clip-operated
DES.Pat.92.996.
Canada Pat 288,148 -BR.pat.291,695- US pat RE.No19.023

Höchstgebot
€ 50
Ohne mindestpreis
Sebastian Schulze
Experte
Schätzung  € 150 - € 200

Ähnliche Objekte

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​

Für Sie aus der Kategorie

Schreibgeräte und Feuerzeuge

  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
  • ​
    ​
    ​
Suchalarm einrichten
Richten Sie einen Suchalarm ein, um benachrichtigt zu werden, sobald neue passende Objekte verfügbar sind.

Dieses Objekt wurde vorgestellt in:

                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    
                                        
                                                                                                    
                    

So kaufen Sie auf Catawiki

Mehr zum Käuferschutz erfahren

      1. Etwas Besonderes entdecken

      Entdecken Sie in unseren Auktionen Tausende von besonderen Objekten, die von Experten ausgewählt wurden. Sehen Sie sich die Fotos, die ausführliche Beschreibung und den Schätzwert der besonderen Objekte an, die Sie interessieren. 

      2. Höchstgebot abgeben

      Finden Sie etwas, das Sie begeistert, und geben Sie das Höchstgebot ab. Sie können die Auktion bis zum Schluss mitverfolgen oder unser System für Sie bieten lassen. Dazu müssen Sie einfach nur den Maximalbetrag eingeben, den Sie für das jeweilige Objekt ausgeben möchten. 

      3. Sichere Zahlung durchführen

      Bezahlen Sie Ihr besonderes Objekt und wir verwahren Ihre Zahlung, bis Ihr Objekt unversehrt bei Ihnen angekommen ist. Wir wickeln alle Transaktionen mit einem zuverlässigen und sicheren Zahlungssystem ab. 

Haben Sie etwas Ähnliches zu verkaufen?

Unabhängig davon, ob Online-Auktionen Neuland für Sie sind oder ob Sie gewerblich verkaufen – wir helfen Ihnen, mehr mit Ihren besonderen Objekten zu verdienen.

Objekt verkaufen