No. 107920597

J.P. - Special - BSA - Benelli OHC - 500 cc - 1947
No. 107920597

J.P. - Special - BSA - Benelli OHC - 500 cc - 1947
J.P. - Benelli 500 OHC engine in BSA frame - 500 cc - 1947
Overview:
This unique motorcycle, built as a "period custom," was first assembled in 1947. It combines a legendary 500cc Benelli engine (dating from approximately 1933) with a BSA A7/A10 motorcycle frame.
Documented History:
The motorcycle has a documented history; it has been in the continuous ownership of a single family since 1976.
The machine evolved over time and is fitted with a post-war BSA A7/A10 frame. This was a practical, period-appropriate solution that allowed this rare pre-war engine to remain in service. The engine fits the frame perfectly, resulting in a clean, period-authentic appearance.
Between 2020 and 2024, the motorcycle underwent a partial restoration, focusing primarily on the engine.
Engine and Technical Condition:
The pre-war Benelli engine underwent a complete professional overhaul, carried out by a renowned specialist in vintage engines. The entire restoration process is documented on YouTube.
During the overhaul, a new piston and gudgeon pin were manufactured, and new piston rings were installed. The cylinder was bored. Additionally, a new intake valve and valve stem were fabricated; the original parts are also available.
Video Documentation: The complete engine overhaul—including the replacement of internal components and final assembly—is captured in a multi-part video series on YouTube. The documentation also includes a video of the engine running.
Magneto: Completely overhauled and rebuilt.
Exhaust: The machine is equipped with an open exhaust system only (no silencers), delivering a stunning, raw, and authentic sound.
The Benelli engine was originally fitted with a Dellorto carburetor and a Magneti Marelli magneto. Due to the unavailability of original parts, the motorcycle is now equipped with a period-correct Amal carburetor and a Bosch magneto.
Note for interested parties: To view the complete engine restoration and hear its amazing sound, please copy the following links (they are not clickable) and paste them into your web browser:
https://www.youtube.com/watch?v=a1O3wVonhPI&list=PLvPJQL90RW8CodkViVku_JYIBmfYTYb8v&index=6
https://www.youtube.com/watch?v=zW3U8DflQfo&list=PLvPJQL90RW8CodkViVku_JYIBmfYTYb8v
Current Condition and Technical Notes (Project / Patina):
The motorcycle is in running condition; however, this is a partial restoration that requires some finishing work to reach a perfect state.
Gearbox: During the restoration, the BSA gearbox was completely disassembled, inspected, and fitted with new seals. Nevertheless, a slight oil leak persists—a common occurrence in machines of this era.
Paintwork: The paint has been unified into a classic red color. This is a functional finish rather than a top-tier professional paint job.
Front Fork: There is noticeable play in the front fork, which requires adjustment or repair; the fork is also leaking oil. The tires hold air pressure but are old and hard.
The fuel tank has been de-rusted and treated with an epoxy primer; the fuel taps have dried-out cork seals. No gasoline has been put into the tank since the de-rusting process.
The primary and secondary chain guards need to be installed.
Electrical system: Currently non-functional. There is no dynamo (a Lucas E3L type would be suitable) or wiring installed; the electrical system requires a complete overhaul.
The engine runs independently thanks to a refurbished magneto.
Riding characteristics: Due to the high compression ratio and the heavy-flywheel design of this pre-war 500cc four-stroke single-cylinder engine, proper riding technique is required. When downshifting, the rider must briefly blip the throttle (to match engine RPM) to prevent the rear wheel from locking up instantly due to the strong engine braking effect. This is a typical characteristic of large single-cylinder motorcycles from the 1930s, not a mechanical fault.
Registration and legal status:
Registration: Standard European (Czech) documentation (with classic white license plates). Note: As this is a period conversion dating back to 1947, the motorcycle is officially registered under a specific name (likely derived from the name of the original builder)—a common registration practice in the former Czechoslovakia. There is no official mention of the brands "BSA" or "Benelli" in the documents.
Identification numbers: Both the frame and engine numbers are officially recorded and fully correspond to the vehicle documentation. Roadworthiness: The vehicle is registered and has a valid Czech technical inspection (STK). Thanks to standard EU registration, transferring the vehicle to another member state is straightforward.
Arranging transport is the responsibility of the buyer.
Similar objects
-
-
-
-
-
-
-
-
-
-
This object was featured in
How to buy on Catawiki
1. Discover something special
2. Place the top bid
3. Make a secure payment

