SARAMONIC Video pre-amp SR-PAX1 DSLR Preamp, Audio Mixer, Saramonic PAX1 2-Channel Microphone Adapter with Phantom Power, Dual XLR, 6.3mm and 3.5mm Inputs + 3.5mm Output for Canon, Nikon, Sony, DSLR Cameras, Pentax The Saramonic SR-PAX1 is a dual channel audio mixer with phantom power specially designed for mirrorless digital camera, DSLR camera and camcorder with microphone jack. It's ideal for recording professional-quality audio from two sources and mixing it into your camera. With two sets of inputs, the SR-PAX1 accepts signals from a wide range of microphone or line-level sources, such as balanced XLR microphones, wireless microphones, guitars or musical instruments with a 6.35mm connector. The 3.5mm inputs are also ideal for connecting audio devices with a 3.5mm output such as a smartphone or an MP3 player. The input levels of each channel can be easily controlled with the dual control buttons. A phone jack allows you to check the audio in real time. The SR-PAX1 makes your recording work much easier. • Saramonic SR-PAX1 is a phantom powered dual channel audio mixer for mirrorless digital camera, DSLR camera and microphone jack camcorder • The input levels of each channel can be easily controlled with the dual control buttons • Ideal for recording professional-quality audio from two sources and mixing it into your camera • A phone jack allows you to check the audio in real time Key Features Two mono 1/8″ (3.5 mm) mini-Jack inputs Two balanced XLR inputs. Two 1/4″ (6.35mm) mono standard inputs Stereo 1/8″ (3.5 mm) mini-Jack input One Stereo 1/8″ (3.5 mm) output jack Mono/Stereo switch (M/S) Dual Trim Control Knobs adjust the signal of each channel to the optimum recording levels LINE /MIC /PH switch 5mm Headphone Output for Monitoring 1/4” Female Screw Hole Specifications Input XLR & 6.3mm jack x 2 1 /8″ (3.5 mm) jack x 3 Output 1/8″ (3.5 mm) jack x 1 Phone 1/8″ (3.5 mm) jack x 1 Frequency Response 20 Hz to 20 Khz, +/-1 dB THD Less than 0.01% @ 1 kHz, -30 dBu input SNR 74dBu @ 1 kHz, -30 dBu input L & R Gain LINE: -30dBuMIC: 0dBu MIC/PH: 0dBu Phantom Power For XLR jacks 48V power supplies For 1/8″ (3.5 mm) jacks 5V power supplies Power Indicator Power on LED indicator in blue Low battery LED indicator in red Power Requirements 9 V alkaline or lithium battery (Not included) Weight 357g Dimensions (L×W×H) 101.2mm × 85.0mm ×65.5mm PLEASE NOTE - Sale does not include camera or mic